This is the latest recevied telemetry packets stored in our database for station/object KJ6IX-9. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Value1* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1836274713 | 400 | 611 | 322 | 0 | 0 |
| 1836274562 | 399 | 611 | 324 | 0 | 0 |
| 1836274414 | 399 | 611 | 319 | 0 | 0 |
| 1836274263 | 399 | 611 | 318 | 0 | 0 |
| 1836274114 | 400 | 611 | 321 | 0 | 0 |
| 1770153710 | 459 | 611 | 313 | 0 | 0 |
| 1770153659 | 458 | 610 | 307 | 0 | 0 |
| 1770153515 | 455 | 607 | 309 | 0 | 0 |
| 1770153510 | 457 | 607 | 310 | 0 | 0 |
| 1770153483 | 455 | 607 | 318 | 0 | 0 |
| 1770153463 | 456 | 606 | 313 | 0 | 0 |
| 1770152879 | 460 | 605 | 314 | 0 | 0 |
| 1770152855 | 461 | 605 | 319 | 0 | 0 |
| 1770152748 | 421 | 606 | 325 | 0 | 0 |
| 1770152449 | 465 | 606 | 310 | 0 | 0 |
| 1770152444 | 464 | 606 | 313 | 0 | 0 |
| 1770152440 | 465 | 606 | 312 | 0 | 0 |
| 1770152315 | 465 | 605 | 315 | 0 | 0 |
| 1770152271 | 464 | 604 | 309 | 0 | 0 |
| 1770152215 | 465 | 604 | 314 | 0 | 0 |
| 1770152170 | 464 | 603 | 313 | 0 | 0 |
| 1770152077 | 466 | 603 | 320 | 0 | 0 |
| 1770151904 | 465 | 602 | 316 | 0 | 0 |
| 1770151854 | 466 | 602 | 311 | 0 | 0 |
| 1770151692 | 468 | 598 | 325 | 0 | 0 |
*Used Equation Coefficients:
Value1: 0, 1, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)