APRS Track Direct

My position About ☰

reset

OE1SCS-4 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object OE1SCS-4. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

Time	Vin*	Rx1h*	Eff1h*	Efftot*
1750131864	12.17 Volt	110 Pkt	91 Pcnt	88 Pcnt
1750128264	12.25 Volt	100 Pkt	91 Pcnt	88 Pcnt
1750124664	12.25 Volt	90 Pkt	90 Pcnt	88 Pcnt
1750121064	12.25 Volt	100 Pkt	93 Pcnt	88 Pcnt
1750117465	12.25 Volt	110 Pkt	90 Pcnt	88 Pcnt
1750113865	12.25 Volt	100 Pkt	89 Pcnt	88 Pcnt
1750110265	12.17 Volt	110 Pkt	88 Pcnt	88 Pcnt
1750106665	12.25 Volt	80 Pkt	85 Pcnt	88 Pcnt
1750103066	12.25 Volt	90 Pkt	88 Pcnt	88 Pcnt
1750099465	12.25 Volt	120 Pkt	88 Pcnt	88 Pcnt
1750095866	12.25 Volt	100 Pkt	90 Pcnt	88 Pcnt
1750092266	12.17 Volt	120 Pkt	88 Pcnt	88 Pcnt
1750088666	12.17 Volt	130 Pkt	92 Pcnt	88 Pcnt
1750085066	12.25 Volt	140 Pkt	90 Pcnt	88 Pcnt
1750081466	12.17 Volt	100 Pkt	95 Pcnt	88 Pcnt
1750077866	12.25 Volt	130 Pkt	91 Pcnt	88 Pcnt
1750074267	12.25 Volt	110 Pkt	92 Pcnt	88 Pcnt
1750070668	12.25 Volt	110 Pkt	91 Pcnt	88 Pcnt
1750067067	12.17 Volt	110 Pkt	91 Pcnt	88 Pcnt
1750063467	12.25 Volt	90 Pkt	90 Pcnt	88 Pcnt
1750059867	12.25 Volt	110 Pkt	91 Pcnt	88 Pcnt
1750056267	12.25 Volt	120 Pkt	92 Pcnt	88 Pcnt
1750052668	12.25 Volt	160 Pkt	83 Pcnt	88 Pcnt
1750049068	12.25 Volt	100 Pkt	85 Pcnt	88 Pcnt

*Used Equation Coefficients:

Vin: 0, 0.079, 0

Rx1h: 0, 10, 0

Eff1h: 0, 1, 0

Efftot: 0, 1, 0

A5: 0, 0, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)