This is the latest recevied telemetry packets stored in our database for station/object SP7THR-12. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1758202293 | 0 Count | 392 Count | 0 Count | 0 VDC | 0 VDC |
| 1758201093 | 0 Count | 392 Count | 0 Count | 0 VDC | 0 VDC |
| 1758199892 | 0 Count | 392 Count | 0 Count | 0 VDC | 0 VDC |
| 1758198692 | 0 Count | 392 Count | 0 Count | 0 VDC | 0 VDC |
| 1758197492 | 0 Count | 392 Count | 0 Count | 0 VDC | 0 VDC |
| 1758196292 | 0 Count | 392 Count | 0 Count | 0 VDC | 0 VDC |
| 1758195092 | 0 Count | 392 Count | 0 Count | 0 VDC | 0 VDC |
| 1758193892 | 0 Count | 392 Count | 0 Count | 0 VDC | 0 VDC |
| 1758192690 | 0 Count | 392 Count | 0 Count | 0 VDC | 0 VDC |
| 1758191490 | 0 Count | 392 Count | 0 Count | 0 VDC | 0 VDC |
| 1758190290 | 0 Count | 390 Count | 0 Count | 0 VDC | 0 VDC |
| 1758189089 | 0 Count | 389 Count | 0 Count | 0 VDC | 0 VDC |
| 1758187889 | 0 Count | 389 Count | 0 Count | 0 VDC | 0 VDC |
| 1758186689 | 0 Count | 388 Count | 0 Count | 0 VDC | 0 VDC |
| 1758185489 | 0 Count | 388 Count | 0 Count | 0 VDC | 0 VDC |
| 1758184292 | 0 Count | 388 Count | 0 Count | 0 VDC | 0 VDC |
| 1758183090 | 0 Count | 388 Count | 0 Count | 0 VDC | 0 VDC |
| 1758181890 | 0 Count | 386 Count | 0 Count | 0 VDC | 0 VDC |
| 1758180690 | 0 Count | 386 Count | 0 Count | 0 VDC | 0 VDC |
| 1758179490 | 0 Count | 386 Count | 0 Count | 0 VDC | 0 VDC |
| 1758178290 | 0 Count | 384 Count | 0 Count | 0 VDC | 0 VDC |
| 1758177090 | 0 Count | 384 Count | 0 Count | 0 VDC | 0 VDC |
| 1758175890 | 0 Count | 384 Count | 0 Count | 0 VDC | 0 VDC |
| 1758174690 | 0 Count | 384 Count | 0 Count | 0 VDC | 0 VDC |
| 1758173490 | 0 Count | 384 Count | 0 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)