APRS Track Direct

My position About ☰

reset

IK3ZXW-11 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object IK3ZXW-11. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Vin*	Rx1h*	Dg1h*	Eff1h*
1790661247	14.18 Volt	1370 Pkt	340 Pkt	60 Pcnt
1790660949	13.8 Volt	1350 Pkt	340 Pkt	60 Pcnt
1790660947	13.8 Volt	1350 Pkt	340 Pkt	60 Pcnt
1790660648	14.03 Volt	1360 Pkt	340 Pkt	60 Pcnt
1790660351	14.18 Volt	1370 Pkt	340 Pkt	60 Pcnt
1790660347	14.18 Volt	1370 Pkt	340 Pkt	60 Pcnt
1790660047	14.18 Volt	1350 Pkt	330 Pkt	60 Pcnt
1790659748	14.18 Volt	1340 Pkt	330 Pkt	60 Pcnt
1790659747	14.18 Volt	1340 Pkt	330 Pkt	60 Pcnt
1790659447	13.73 Volt	1310 Pkt	330 Pkt	60 Pcnt
1790659149	14.18 Volt	1290 Pkt	330 Pkt	59 Pcnt
1790659147	14.18 Volt	1290 Pkt	330 Pkt	59 Pcnt
1790658847	14.18 Volt	1290 Pkt	320 Pkt	59 Pcnt
1790658556	14.18 Volt	1290 Pkt	310 Pkt	58 Pcnt
1790658547	14.18 Volt	1290 Pkt	310 Pkt	58 Pcnt
1790658247	14.18 Volt	1290 Pkt	320 Pkt	58 Pcnt
1790657949	14.18 Volt	1290 Pkt	320 Pkt	59 Pcnt
1790657947	14.18 Volt	1290 Pkt	320 Pkt	59 Pcnt
1790657647	14.18 Volt	1270 Pkt	310 Pkt	58 Pcnt
1790657357	14.18 Volt	1260 Pkt	310 Pkt	58 Pcnt
1790657347	14.18 Volt	1260 Pkt	310 Pkt	58 Pcnt
1790657047	14.18 Volt	1230 Pkt	310 Pkt	58 Pcnt
1790656755	14.18 Volt	1220 Pkt	320 Pkt	57 Pcnt
1790656748	14.18 Volt	1220 Pkt	320 Pkt	57 Pcnt
1790656447	14.18 Volt	1240 Pkt	330 Pkt	58 Pcnt

*Used Equation Coefficients:

Vin: 0, 0.075, 0

Rx1h: 0, 10, 0

Dg1h: 0, 10, 0

Eff1h: 0, 1, 0

A5: 0, 0, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)