This is the latest recevied telemetry packets stored in our database for station/object HS5CXL-1. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | RxTraffic* | TxTraffic* | RxDrop* | RSSI* | SUN* |
|---|---|---|---|---|---|
| 1836274393 | 8 Pkt | 0 Pkt | 0 Pkt | -70 dBm | 97 % |
| 1770119431 | 28 Pkt | 0 Pkt | 0 Pkt | -71 dBm | 0 % |
| 1770117606 | 27 Pkt | 0 Pkt | 0 Pkt | -61 dBm | 4 % |
| 1770115782 | 26 Pkt | 0 Pkt | 0 Pkt | -60 dBm | 21 % |
| 1770113960 | 25 Pkt | 0 Pkt | 0 Pkt | -59 dBm | 27 % |
| 1770112137 | 26 Pkt | 0 Pkt | 0 Pkt | -59 dBm | 70 % |
| 1770110314 | 24 Pkt | 0 Pkt | 0 Pkt | -60 dBm | 76 % |
| 1770108492 | 22 Pkt | 0 Pkt | 0 Pkt | -61 dBm | 52 % |
| 1770106669 | 21 Pkt | 0 Pkt | 0 Pkt | -62 dBm | 79 % |
| 1770105169 | 25 Pkt | 0 Pkt | 0 Pkt | -62 dBm | 100 % |
| 1770103346 | 26 Pkt | 0 Pkt | 0 Pkt | -60 dBm | 86 % |
| 1770101524 | 12 Pkt | 0 Pkt | 0 Pkt | -60 dBm | 100 % |
| 1770100730 | 24 Pkt | 0 Pkt | 0 Pkt | -59 dBm | 100 % |
| 1770098907 | 29 Pkt | 0 Pkt | 0 Pkt | -60 dBm | 76 % |
| 1770097084 | 30 Pkt | 0 Pkt | 0 Pkt | -61 dBm | 100 % |
| 1770095259 | 0 Pkt | 0 Pkt | 0 Pkt | -63 dBm | 100 % |
| 1770093437 | 0 Pkt | 0 Pkt | 0 Pkt | -64 dBm | 100 % |
| 1770091615 | 0 Pkt | 0 Pkt | 0 Pkt | -62 dBm | 100 % |
| 1770089793 | 0 Pkt | 0 Pkt | 0 Pkt | -60 dBm | 100 % |
| 1770087971 | 0 Pkt | 0 Pkt | 0 Pkt | -63 dBm | 93 % |
| 1770086149 | 0 Pkt | 0 Pkt | 0 Pkt | -64 dBm | 95 % |
| 1770084338 | 0 Pkt | 0 Pkt | 0 Pkt | -64 dBm | 100 % |
| 1770082505 | 0 Pkt | 0 Pkt | 0 Pkt | -63 dBm | 99 % |
| 1770080682 | 0 Pkt | 0 Pkt | 0 Pkt | -63 dBm | 98 % |
| 1770078860 | 0 Pkt | 0 Pkt | 0 Pkt | -59 dBm | 37 % |
*Used Equation Coefficients:
RxTraffic: 0, 1, 0
TxTraffic: 0, 1, 0
RxDrop: 0, 1, 0
RSSI: 0, -1, 0
SUN: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)