This is the latest recevied telemetry packets stored in our database for station/object OE3WAS-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Press* | Temp.in* | Hum* | eCO2* | Temp.out* |
|---|---|---|---|---|---|
| 1763940627 | 978.9 hPa | 28 C deg | 30.8 % | 1356 ppm | 24.6 C deg |
| 1763937001 | 980.2 hPa | 27.7 C deg | 29.9 % | 1204 ppm | 24.7 C deg |
| 1763927927 | 982.8 hPa | 28 C deg | 29.1 % | 1710 ppm | 24.6 C deg |
| 1763926116 | 983.2 hPa | 28.4 C deg | 32.7 % | 2197 ppm | 24.8 C deg |
| 1763922492 | 984 hPa | 28.2 C deg | 33.1 % | 1893 ppm | 24.9 C deg |
| 1763918853 | 984.8 hPa | 27.4 C deg | 34.1 % | 1848 ppm | 24.1 C deg |
| 1763906145 | 985.6 hPa | 27.3 C deg | 34.1 % | 951 ppm | 23.9 C deg |
| 1763893442 | 987.8 hPa | 26.9 C deg | 33.7 % | 975 ppm | 23.6 C deg |
| 1763891624 | 988.2 hPa | 26.7 C deg | 33.8 % | 983 ppm | 23.3 C deg |
| 1763889809 | 988.4 hPa | 26.7 C deg | 33.8 % | 1062 ppm | 23.3 C deg |
| 1763858958 | 990.2 hPa | 27.6 C deg | 33.3 % | 1524 ppm | 24.3 C deg |
| 1763857146 | 990.2 hPa | 27.3 C deg | 33.5 % | 1465 ppm | 23.8 C deg |
*Used Equation Coefficients:
Press: 0, 1, 0
Temp.in: 0, 1, 0
Hum: 0, 1, 0
eCO2: 0, 1, 0
Temp.out: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)