APRS Track Direct

My position About ☰

reset

N2MH-15 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object N2MH-15. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 >>

Time	Avg 10m*	Avg 10m*	RxPkts*	IGateDropRx*	TxPkts*
1786786116	0.14 Rx Erlang	0.03 Tx Erlang	121 count/10m	14 count/10m	21 count/10m
1786784916	0.14 Rx Erlang	0.03 Tx Erlang	129 count/10m	23 count/10m	27 count/10m
1786783716	0.14 Rx Erlang	0.04 Tx Erlang	126 count/10m	15 count/10m	32 count/10m
1786782516	0.14 Rx Erlang	0.03 Tx Erlang	122 count/10m	8 count/10m	23 count/10m
1786781316	0.13 Rx Erlang	0.02 Tx Erlang	115 count/10m	8 count/10m	19 count/10m
1786780116	0.12 Rx Erlang	0.03 Tx Erlang	105 count/10m	8 count/10m	23 count/10m
1786778916	0.11 Rx Erlang	0.02 Tx Erlang	103 count/10m	7 count/10m	19 count/10m
1786777716	0.13 Rx Erlang	0.02 Tx Erlang	121 count/10m	11 count/10m	20 count/10m
1786776516	0.1 Rx Erlang	0.03 Tx Erlang	100 count/10m	7 count/10m	21 count/10m
1786775316	0.13 Rx Erlang	0.02 Tx Erlang	115 count/10m	13 count/10m	21 count/10m
1786774116	0.11 Rx Erlang	0.03 Tx Erlang	109 count/10m	26 count/10m	24 count/10m
1786772916	0.14 Rx Erlang	0.05 Tx Erlang	133 count/10m	70 count/10m	49 count/10m
1786771716	0.14 Rx Erlang	0.04 Tx Erlang	134 count/10m	59 count/10m	36 count/10m
1786770516	0.15 Rx Erlang	0.04 Tx Erlang	126 count/10m	45 count/10m	30 count/10m
1786769316	0.14 Rx Erlang	0.03 Tx Erlang	135 count/10m	32 count/10m	27 count/10m
1786768116	0.14 Rx Erlang	0.03 Tx Erlang	130 count/10m	11 count/10m	27 count/10m
1786766916	0.14 Rx Erlang	0.03 Tx Erlang	134 count/10m	15 count/10m	24 count/10m
1786765716	0.15 Rx Erlang	0.04 Tx Erlang	146 count/10m	23 count/10m	34 count/10m
1786764516	0.16 Rx Erlang	0.03 Tx Erlang	143 count/10m	13 count/10m	27 count/10m
1786763316	0.14 Rx Erlang	0.02 Tx Erlang	122 count/10m	4 count/10m	19 count/10m
1786762116	0.11 Rx Erlang	0.03 Tx Erlang	102 count/10m	2 count/10m	25 count/10m
1786760916	0.14 Rx Erlang	0.03 Tx Erlang	122 count/10m	11 count/10m	25 count/10m
1786759716	0.13 Rx Erlang	0.03 Tx Erlang	115 count/10m	11 count/10m	20 count/10m
1786758516	0.12 Rx Erlang	0.04 Tx Erlang	111 count/10m	25 count/10m	30 count/10m
1786757316	0.13 Rx Erlang	0.05 Tx Erlang	118 count/10m	28 count/10m	31 count/10m

*Used Equation Coefficients:

Avg 10m: 0, 0.005, 0

RxPkts: 0, 1, 0

IGateDropRx: 0, 1, 0

TxPkts: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)