APRS Track Direct

My position About ☰

reset

SR9NSK-5 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object SR9NSK-5. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Rx10min*	Tx10min*	Digi10min*	Tempre*
1786746544	61 Pkt	2 Pkt	0 Pkt	34 DegC
1786745944	78 Pkt	7 Pkt	0 Pkt	34.5 DegC
1786745333	56 Pkt	2 Pkt	0 Pkt	34.5 DegC
1786744733	65 Pkt	3 Pkt	0 Pkt	34.5 DegC
1786744131	67 Pkt	3 Pkt	0 Pkt	34.5 DegC
1786743529	54 Pkt	3 Pkt	0 Pkt	34.5 DegC
1786742927	38 Pkt	2 Pkt	0 Pkt	34.5 DegC
1786742327	76 Pkt	5 Pkt	2 Pkt	35 DegC
1786741725	69 Pkt	2 Pkt	0 Pkt	35 DegC
1786741125	65 Pkt	7 Pkt	3 Pkt	35 DegC
1786740523	64 Pkt	2 Pkt	0 Pkt	35 DegC
1786739923	59 Pkt	5 Pkt	2 Pkt	35 DegC
1786739321	72 Pkt	4 Pkt	2 Pkt	35.5 DegC
1786738721	66 Pkt	3 Pkt	0 Pkt	35.5 DegC
1786738119	53 Pkt	2 Pkt	0 Pkt	35.5 DegC
1786737519	76 Pkt	4 Pkt	0 Pkt	35.5 DegC
1786736915	72 Pkt	7 Pkt	1 Pkt	35.5 DegC
1786736306	50 Pkt	3 Pkt	0 Pkt	35.5 DegC
1786735704	59 Pkt	3 Pkt	1 Pkt	36 DegC
1786735104	75 Pkt	3 Pkt	0 Pkt	36 DegC
1786734502	80 Pkt	7 Pkt	4 Pkt	36 DegC
1786733901	86 Pkt	6 Pkt	3 Pkt	36.5 DegC
1786733299	87 Pkt	3 Pkt	1 Pkt	36.5 DegC
1786732699	72 Pkt	4 Pkt	1 Pkt	36.5 DegC
1786732096	86 Pkt	2 Pkt	0 Pkt	37 DegC

*Used Equation Coefficients:

Rx10min: 0, 1, 0

Tx10min: 0, 1, 0

Digi10min: 0, 1, 0

HostTx10m: 0, 1, 0

Tempre: 0, 0.5, -50

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)