APRS Track Direct

My position About ☰

reset

E20EHQ-10 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object E20EHQ-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Vin*	Rx1h*	Dg1h*	Eff1h*	Eff*
1778050532	13.9 Volt	30 Pkt	0 Pkt	87 Pcnt	57 Pcnt
1778050531	13.9 Volt	30 Pkt	0 Pkt	87 Pcnt	57 Pcnt
1778049932	13.9 Volt	30 Pkt	0 Pkt	87 Pcnt	57 Pcnt
1778049931	13.9 Volt	30 Pkt	0 Pkt	87 Pcnt	57 Pcnt
1778049332	13.9 Volt	30 Pkt	0 Pkt	86 Pcnt	57 Pcnt
1778049331	13.9 Volt	30 Pkt	0 Pkt	86 Pcnt	57 Pcnt
1778048732	13.9 Volt	30 Pkt	0 Pkt	87 Pcnt	56 Pcnt
1778048731	13.9 Volt	30 Pkt	0 Pkt	87 Pcnt	56 Pcnt
1778048132	13.9 Volt	30 Pkt	0 Pkt	83 Pcnt	56 Pcnt
1778048131	13.9 Volt	30 Pkt	0 Pkt	83 Pcnt	56 Pcnt
1778047532	13.9 Volt	30 Pkt	0 Pkt	88 Pcnt	56 Pcnt
1778047531	13.9 Volt	30 Pkt	0 Pkt	88 Pcnt	56 Pcnt
1778046932	13.9 Volt	20 Pkt	0 Pkt	93 Pcnt	56 Pcnt
1778046931	13.9 Volt	20 Pkt	0 Pkt	93 Pcnt	56 Pcnt
1778046332	13.9 Volt	20 Pkt	0 Pkt	93 Pcnt	56 Pcnt
1778046331	13.9 Volt	20 Pkt	0 Pkt	93 Pcnt	56 Pcnt
1778045732	13.9 Volt	30 Pkt	0 Pkt	93 Pcnt	56 Pcnt
1778045731	13.9 Volt	30 Pkt	0 Pkt	93 Pcnt	56 Pcnt
1778045132	13.9 Volt	30 Pkt	0 Pkt	94 Pcnt	56 Pcnt
1778045131	13.9 Volt	30 Pkt	0 Pkt	94 Pcnt	56 Pcnt
1778044532	13.9 Volt	30 Pkt	0 Pkt	94 Pcnt	56 Pcnt
1778044532	13.9 Volt	30 Pkt	0 Pkt	94 Pcnt	56 Pcnt
1778043932	13.9 Volt	30 Pkt	0 Pkt	90 Pcnt	56 Pcnt
1778043932	-	-	-	-	-
1778043931	13.9 Volt	30 Pkt	0 Pkt	90 Pcnt	56 Pcnt

*Used Equation Coefficients:

Vin: 0, 0.079, 0

Rx1h: 0, 10, 0

Dg1h: 0, 10, 0

Eff1h: 0, 1, 0

Eff: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)