APRS Track Direct

My position About ☰

reset

OH5RUG-2 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object OH5RUG-2. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Cpu*	Temp*	FreeM*	RxP*	TxP*
1786733443	1.14 Load	62.84 DegC	106 Mb	473 Pkt	432 Pkt
1786733143	1.18 Load	62.3 DegC	106 Mb	163 Pkt	143 Pkt
1786732844	1.11 Load	62.84 DegC	105 Mb	472 Pkt	426 Pkt
1786732543	1.13 Load	62.3 DegC	101 Mb	159 Pkt	142 Pkt
1786732243	1.2 Load	62.3 DegC	106 Mb	478 Pkt	439 Pkt
1786731943	1.15 Load	62.84 DegC	109 Mb	158 Pkt	140 Pkt
1786731643	1.15 Load	62.84 DegC	104 Mb	469 Pkt	415 Pkt
1786731343	1.17 Load	62.3 DegC	100 Mb	160 Pkt	141 Pkt
1786731043	1.24 Load	62.3 DegC	109 Mb	481 Pkt	413 Pkt
1786730743	1.17 Load	63.38 DegC	106 Mb	157 Pkt	137 Pkt
1786730443	1.1 Load	62.3 DegC	106 Mb	480 Pkt	430 Pkt
1786730143	1.16 Load	63.38 DegC	106 Mb	161 Pkt	143 Pkt
1786729844	1.17 Load	62.84 DegC	106 Mb	473 Pkt	403 Pkt
1786729543	1.14 Load	63.91 DegC	107 Mb	171 Pkt	412 Pkt
1786729243	1.12 Load	63.38 DegC	109 Mb	478 Pkt	431 Pkt
1786728943	1.12 Load	63.38 DegC	109 Mb	155 Pkt	137 Pkt
1786728643	1.17 Load	63.38 DegC	108 Mb	470 Pkt	420 Pkt
1786728343	1.14 Load	63.38 DegC	105 Mb	225 Pkt	170 Pkt
1786728043	1.2 Load	63.38 DegC	104 Mb	479 Pkt	413 Pkt
1786727743	1.15 Load	63.38 DegC	107 Mb	159 Pkt	138 Pkt
1786727443	1.14 Load	63.38 DegC	105 Mb	474 Pkt	423 Pkt
1786727143	1.14 Load	63.38 DegC	110 Mb	154 Pkt	134 Pkt
1786726843	1.14 Load	63.91 DegC	103 Mb	476 Pkt	412 Pkt
1786726543	1.17 Load	63.91 DegC	107 Mb	234 Pkt	207 Pkt
1786726243	1.1 Load	63.38 DegC	108 Mb	480 Pkt	422 Pkt

*Used Equation Coefficients:

Cpu: 0, 0.001, 0

Temp: 0, 0.001, 0

FreeM: 0, 1, 0

RxP: 0, 1, 0

TxP: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)