APRS Track Direct

My position About ☰

reset

TA3D Telemetry

This is the latest recevied telemetry packets stored in our database for station/object TA3D. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 >>

Time	RxTraffic*	TxTraffic*	RSSI*	Voltage*
1763238720	0 Pkt	19 Pkt	-62 dBm	13.29 V
1763237775	2 Pkt	13 Pkt	-62 dBm	13.31 V
1763236839	2 Pkt	14 Pkt	-62 dBm	13.29 V
1763235903	2 Pkt	14 Pkt	-63 dBm	13.29 V
1763234968	3 Pkt	16 Pkt	-63 dBm	13.31 V
1763234027	3 Pkt	29 Pkt	-62 dBm	13.31 V
1763233075	2 Pkt	12 Pkt	-62 dBm	13.31 V
1763232139	3 Pkt	12 Pkt	-63 dBm	13.31 V
1763231203	3 Pkt	15 Pkt	-63 dBm	13.31 V
1763230263	3 Pkt	12 Pkt	-62 dBm	13.31 V
1763229329	3 Pkt	10 Pkt	-63 dBm	13.31 V
1763228397	3 Pkt	13 Pkt	-62 dBm	13.31 V
1763227459	3 Pkt	13 Pkt	-63 dBm	13.31 V
1763226521	4 Pkt	11 Pkt	-62 dBm	13.31 V
1763225587	2 Pkt	11 Pkt	-62 dBm	13.31 V
1763224653	1 Pkt	4 Pkt	-62 dBm	13.31 V
1763223863	1 Pkt	12 Pkt	-62 dBm	13.31 V
1763222927	0 Pkt	0 Pkt	-62 dBm	13.31 V
1763222758	3 Pkt	11 Pkt	-61 dBm	13.31 V
1763221823	2 Pkt	14 Pkt	-62 dBm	13.31 V
1763220886	3 Pkt	13 Pkt	-64 dBm	13.31 V
1763219953	3 Pkt	15 Pkt	-61 dBm	13.31 V
1763217192	0 Pkt	3 Pkt	-61 dBm	13.31 V
1763216205	3 Pkt	24 Pkt	-62 dBm	13.29 V
1763215256	3 Pkt	37 Pkt	-62 dBm	13.29 V

*Used Equation Coefficients:

RxTraffic: 0, 1, 0

TxTraffic: 0, 1, 0

RxDrop: 0, 1, 0

RSSI: 0, -1, 0

Voltage: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)