This is the latest recevied telemetry packets stored in our database for station/object F1ZUI-13z. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Tint* | RHint* | Lum.* | Vent* | Value5* |
|---|---|---|---|---|---|
| 1763283129 | 20.55 C | 60 % | 0 % | 0 kmh | 0 |
| 1763282517 | 20.59 C | 61 % | 0 % | 0 kmh | 0 |
| 1763281295 | 20.66 C | 61 % | 0 % | 0 kmh | 0 |
| 1763280683 | 20.65 C | 61 % | 0 % | 0 kmh | 0 |
| 1763280072 | 20.59 C | 61 % | 0 % | 0 kmh | 0 |
| 1763279461 | 20.44 C | 61 % | 0 % | 0 kmh | 0 |
| 1763278850 | 20.3 C | 61 % | 0 % | 0 kmh | 0 |
| 1763278238 | 20.12 C | 62 % | 0 % | 0 kmh | 0 |
| 1763277627 | 19.91 C | 62 % | 0 % | 0 kmh | 0 |
| 1763277016 | 19.66 C | 62 % | 0 % | 0 kmh | 0 |
| 1763276404 | 19.46 C | 63 % | 0 % | 0 kmh | 0 |
| 1763275793 | 19.34 C | 63 % | 0 % | 0 kmh | 0 |
| 1763275182 | 19.34 C | 63 % | 0 % | 0 kmh | 0 |
| 1763274571 | 19.35 C | 63 % | 0 % | 0 kmh | 0 |
| 1763273959 | 19.36 C | 63 % | 0 % | 0 kmh | 0 |
| 1763273348 | 19.37 C | 63 % | 0 % | 0 kmh | 0 |
| 1763272737 | 19.35 C | 63 % | 0 % | 0 kmh | 0 |
| 1763272125 | 19.4 C | 63 % | 0 % | 0 kmh | 0 |
| 1763271514 | 19.37 C | 64 % | 0 % | 0 kmh | 0 |
| 1763270903 | 19.4 C | 63 % | 0 % | 0 kmh | 0 |
| 1763270291 | 19.37 C | 64 % | 0 % | 0 kmh | 0 |
| 1763268458 | 19.4 C | 64 % | 0 % | 0 kmh | 0 |
| 1763267846 | 19.4 C | 64 % | 0 % | 0 kmh | 0 |
| 1763267235 | 19.42 C | 64 % | 0 % | 0 kmh | 0 |
| 1763266624 | 19.42 C | 64 % | 0 % | 0 kmh | 0 |
*Used Equation Coefficients:
Tint: 0, 1, 0
RHint: 0, 1, 0
Lum.: 0, 1, 0
Vent: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)