This is the latest recevied telemetry packets stored in our database for station/object VK2RMM-3. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Value1* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1732304624 | 146 | 154 | 247 | 0 | 0 |
| 1732302789 | 147 | 153 | 248 | 0 | 0 |
| 1732300952 | 146 | 153 | 248 | 0 | 0 |
| 1732299120 | 147 | 153 | 246 | 0 | 0 |
| 1732297279 | 146 | 154 | 247 | 0 | 0 |
| 1732295449 | 147 | 155 | 248 | 0 | 0 |
| 1732293611 | 147 | 155 | 248 | 0 | 0 |
| 1732291771 | 147 | 155 | 248 | 0 | 0 |
| 1732289937 | 147 | 156 | 248 | 0 | 0 |
| 1732288106 | 147 | 156 | 246 | 0 | 0 |
| 1732286264 | 146 | 156 | 248 | 0 | 0 |
| 1732284425 | 147 | 157 | 248 | 0 | 0 |
| 1732282593 | 147 | 158 | 249 | 0 | 0 |
| 1732280757 | 147 | 158 | 247 | 0 | 0 |
| 1732278920 | 147 | 157 | 247 | 0 | 0 |
| 1732277087 | 147 | 159 | 248 | 0 | 0 |
| 1732275251 | 147 | 159 | 246 | 0 | 0 |
| 1732273421 | 147 | 159 | 248 | 0 | 0 |
| 1732271583 | 147 | 161 | 247 | 0 | 0 |
| 1732269749 | 147 | 161 | 248 | 0 | 0 |
| 1732267913 | 147 | 162 | 248 | 0 | 0 |
| 1732266087 | 147 | 162 | 247 | 0 | 0 |
| 1732264256 | 147 | 163 | 249 | 0 | 0 |
| 1732262426 | 147 | 165 | 249 | 0 | 0 |
| 1732260590 | 147 | 170 | 249 | 0 | 0 |
*Used Equation Coefficients:
Value1: 0, 1, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)