This is the latest recevied telemetry packets stored in our database for station/object OH7LZB-14. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Value1* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1792110801 | 3335 | 2926 | 2955 | 0 | 0 |
| 1792110056 | 3335 | 2926 | 2946 | 0 | 0 |
| 1792109191 | 3332 | 2926 | 2949 | 0 | 0 |
| 1792108436 | 3332 | 2926 | 2941 | 0 | 0 |
| 1792107591 | 3329 | 2923 | 2949 | 0 | 0 |
| 1792106866 | 3329 | 2923 | 2946 | 0 | 0 |
| 1792106101 | 3329 | 2923 | 2944 | 0 | 0 |
| 1792105283 | 3329 | 2923 | 2944 | 0 | 0 |
| 1792104396 | 3329 | 2923 | 2941 | 0 | 0 |
| 1792103581 | 3329 | 2921 | 2941 | 0 | 0 |
| 1792102691 | 3326 | 2921 | 2941 | 0 | 0 |
| 1792101926 | 3326 | 2921 | 2944 | 0 | 0 |
| 1792101136 | 3326 | 2921 | 2938 | 0 | 0 |
| 1792100261 | 3326 | 2921 | 2932 | 0 | 0 |
| 1792099491 | 3326 | 2918 | 2935 | 0 | 0 |
| 1792098746 | 3323 | 2918 | 2941 | 0 | 0 |
| 1792097926 | 3323 | 2918 | 2935 | 0 | 0 |
| 1792097031 | 3323 | 2918 | 2938 | 0 | 0 |
| 1792096169 | 3323 | 2918 | 2941 | 0 | 0 |
| 1792095336 | 3320 | 2915 | 2941 | 0 | 0 |
| 1792094476 | 3320 | 2918 | 2941 | 0 | 0 |
| 1792093581 | 3320 | 2915 | 2941 | 0 | 0 |
| 1792092736 | 3317 | 2915 | 2941 | 0 | 0 |
| 1792091891 | 3317 | 2912 | 2938 | 0 | 0 |
| 1792091096 | 3317 | 2912 | 2938 | 0 | 0 |
*Used Equation Coefficients:
Value1: 0, 1, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)