APRS Track Direct

My position About ☰

reset

SQ8JIU-1 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object SQ8JIU-1. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Vin*	Rx10m*	Dg1h*	Eff1h*	Temp*
1753705441	12.53 Volt	18 Pkt	1 Pkt	64 Pcnt	5 C
1753704841	12.53 Volt	20 Pkt	1 Pkt	57 Pcnt	5 C
1753704241	12.45 Volt	18 Pkt	0 Pkt	56 Pcnt	5 C
1753703641	12.45 Volt	23 Pkt	2 Pkt	54 Pcnt	5 C
1753703041	12.53 Volt	25 Pkt	0 Pkt	52 Pcnt	5 C
1753702441	12.38 Volt	19 Pkt	0 Pkt	49 Pcnt	5 C
1753701841	12.45 Volt	11 Pkt	1 Pkt	49 Pcnt	5 C
1753701241	12.45 Volt	13 Pkt	1 Pkt	55 Pcnt	5 C
1753700641	12.3 Volt	16 Pkt	0 Pkt	53 Pcnt	5 C
1753700041	12.45 Volt	12 Pkt	2 Pkt	60 Pcnt	5 C
1753699441	12.45 Volt	15 Pkt	0 Pkt	61 Pcnt	5 C
1753698841	12.53 Volt	20 Pkt	0 Pkt	61 Pcnt	5 C
1753698241	12.53 Volt	12 Pkt	1 Pkt	56 Pcnt	5 C
1753697641	12.53 Volt	12 Pkt	1 Pkt	56 Pcnt	5 C
1753697041	12.53 Volt	24 Pkt	0 Pkt	56 Pcnt	5 C
1753696441	12.53 Volt	13 Pkt	2 Pkt	53 Pcnt	5 C
1753695841	12.53 Volt	15 Pkt	0 Pkt	54 Pcnt	5 C
1753695241	12.53 Volt	14 Pkt	0 Pkt	52 Pcnt	5 C
1753694641	12.53 Volt	15 Pkt	1 Pkt	52 Pcnt	5 C
1753694041	12.53 Volt	11 Pkt	1 Pkt	54 Pcnt	5 C
1753693441	12.53 Volt	20 Pkt	0 Pkt	54 Pcnt	5 C
1753692841	12.53 Volt	13 Pkt	2 Pkt	52 Pcnt	5 C
1753692241	12.53 Volt	13 Pkt	0 Pkt	52 Pcnt	5 C
1753691641	12.53 Volt	11 Pkt	0 Pkt	54 Pcnt	5 C
1753691041	12.53 Volt	20 Pkt	2 Pkt	57 Pcnt	5 C

*Used Equation Coefficients:

Vin: 0, 0.075, 0

Rx10m: 0, 1, 0

Dg1h: 0, 1, 0

Eff1h: 0, 1, 0

Temp: 0, 0, 5

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)