This is the latest recevied telemetry packets stored in our database for station/object IR2DG. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Rx10m* | Rx1h* | Dg10m* | Dg1h* | Eff1h* |
|---|---|---|---|---|---|
| 1758173390 | 0 Pkt | 0 Pkt | 0 Pkt | 0 Pkt | 40 Pcnt |
| 1758173090 | 0 Pkt | 0 Pkt | 0 Pkt | 0 Pkt | 40 Pcnt |
| 1758172790 | 0 Pkt | 0 Pkt | 0 Pkt | 0 Pkt | 40 Pcnt |
| 1758172489 | 1 Pkt | 0 Pkt | 0 Pkt | 0 Pkt | 40 Pcnt |
| 1758172189 | 1 Pkt | 0 Pkt | 0 Pkt | 0 Pkt | 40 Pcnt |
| 1758171889 | 0 Pkt | 0 Pkt | 0 Pkt | 0 Pkt | 40 Pcnt |
| 1758171589 | 0 Pkt | 0 Pkt | 0 Pkt | 0 Pkt | 40 Pcnt |
| 1758171288 | 0 Pkt | 0 Pkt | 0 Pkt | 0 Pkt | 40 Pcnt |
| 1758170988 | 0 Pkt | 0 Pkt | 0 Pkt | 0 Pkt | 33 Pcnt |
| 1758170688 | 1 Pkt | 0 Pkt | 0 Pkt | 0 Pkt | 33 Pcnt |
| 1758170387 | 1 Pkt | 0 Pkt | 0 Pkt | 0 Pkt | 50 Pcnt |
| 1758170087 | 0 Pkt | 0 Pkt | 0 Pkt | 0 Pkt | 50 Pcnt |
| 1758169787 | 0 Pkt | 0 Pkt | 0 Pkt | 0 Pkt | 50 Pcnt |
| 1758169487 | 0 Pkt | 0 Pkt | 0 Pkt | 0 Pkt | 50 Pcnt |
| 1758169186 | 0 Pkt | 0 Pkt | 0 Pkt | 0 Pkt | 40 Pcnt |
| 1758168886 | 1 Pkt | 0 Pkt | 0 Pkt | 0 Pkt | 28 Pcnt |
| 1758168586 | 0 Pkt | 0 Pkt | 0 Pkt | 0 Pkt | 25 Pcnt |
| 1758168285 | 0 Pkt | 0 Pkt | 0 Pkt | 0 Pkt | 25 Pcnt |
| 1758167985 | 0 Pkt | 0 Pkt | 0 Pkt | 0 Pkt | 28 Pcnt |
| 1758167685 | 0 Pkt | 0 Pkt | 0 Pkt | 0 Pkt | 28 Pcnt |
| 1758167385 | 1 Pkt | 0 Pkt | 0 Pkt | 0 Pkt | 33 Pcnt |
| 1758167084 | 1 Pkt | 0 Pkt | 0 Pkt | 0 Pkt | 28 Pcnt |
| 1758166784 | 0 Pkt | 0 Pkt | 0 Pkt | 0 Pkt | 22 Pcnt |
| 1758166484 | 0 Pkt | 0 Pkt | 0 Pkt | 0 Pkt | 22 Pcnt |
| 1758166183 | 0 Pkt | 0 Pkt | 0 Pkt | 0 Pkt | 22 Pcnt |
*Used Equation Coefficients:
Rx10m: 0, 1, 0
Rx1h: 0, 10, 0
Dg10m: 0, 1, 0
Dg1h: 0, 10, 0
Eff1h: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)