This is the latest recevied telemetry packets stored in our database for station/object AE4BA. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Load* | CPUTemp* | MemUsed* | DiskUsed* | SwapUsed* |
|---|---|---|---|---|---|
| 1792150810 | 0.4 x50 | 47 C | 23 % | 33 % | 32 % |
| 1792150210 | 0.12 x50 | 51 C | 23 % | 33 % | 32 % |
| 1792149610 | 0.2 x50 | 46 C | 23 % | 33 % | 32 % |
| 1792149010 | 0.06 x50 | 50 C | 23 % | 33 % | 32 % |
| 1792148410 | 0.08 x50 | 53 C | 23 % | 33 % | 32 % |
| 1792147810 | 0.28 x50 | 49 C | 23 % | 33 % | 32 % |
| 1792147210 | 0.1 x50 | 46 C | 23 % | 33 % | 32 % |
| 1792146610 | 0.4 x50 | 46 C | 23 % | 33 % | 32 % |
| 1792146010 | 0.1 x50 | 45 C | 23 % | 33 % | 32 % |
| 1792145410 | 0.04 x50 | 49 C | 23 % | 33 % | 32 % |
| 1792144810 | 0.04 x50 | 44 C | 23 % | 33 % | 32 % |
| 1792144210 | 0.22 x50 | 53 C | 23 % | 33 % | 32 % |
| 1792143610 | 0.28 x50 | 46 C | 23 % | 33 % | 32 % |
| 1792143010 | 0.24 x50 | 47 C | 22 % | 33 % | 32 % |
| 1792142410 | 0.26 x50 | 46 C | 23 % | 33 % | 32 % |
| 1792141810 | 0.2 x50 | 53 C | 23 % | 33 % | 32 % |
| 1792141210 | 0.12 x50 | 51 C | 23 % | 33 % | 32 % |
| 1792140610 | 0.24 x50 | 46 C | 23 % | 33 % | 32 % |
| 1792140010 | 0.2 x50 | 46 C | 23 % | 33 % | 32 % |
| 1792139410 | 0.16 x50 | 50 C | 23 % | 33 % | 32 % |
| 1792138810 | 0.16 x50 | 50 C | 23 % | 33 % | 32 % |
| 1792138210 | 0.14 x50 | 50 C | 23 % | 33 % | 32 % |
| 1792137610 | 0.68 x50 | 53 C | 23 % | 33 % | 32 % |
| 1792137009 | 0.24 x50 | 49 C | 23 % | 33 % | 32 % |
| 1792136410 | 0.16 x50 | 52 C | 23 % | 33 % | 32 % |
*Used Equation Coefficients:
Load: 0, 0.02, 0
CPUTemp: 0, 1, 0
MemUsed: 0, 1, 0
DiskUsed: 0, 1, 0
SwapUsed: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)