APRS Track Direct

My position About ☰

reset

TYHEE Telemetry

This is the latest recevied telemetry packets stored in our database for station/object TYHEE. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 >>

Time	Vin*	Temp*	Dg1h*	Eff1h*
1750237963	13.18 Volt	22.5 C	10 Pkt	15 Pcnt
1750236163	13.18 Volt	22.5 C	10 Pkt	21 Pcnt
1750234363	13.18 Volt	23 C	10 Pkt	20 Pcnt
1750232563	13.18 Volt	23.5 C	10 Pkt	12 Pcnt
1750230763	13.18 Volt	23.5 C	20 Pkt	20 Pcnt
1750228963	13.18 Volt	24 C	20 Pkt	34 Pcnt
1750227163	13.18 Volt	24 C	20 Pkt	36 Pcnt
1750225363	13.18 Volt	23.5 C	20 Pkt	31 Pcnt
1750223563	13.18 Volt	23.5 C	20 Pkt	22 Pcnt
1750221763	13.18 Volt	23 C	10 Pkt	19 Pcnt
1750219963	13.18 Volt	22.5 C	10 Pkt	22 Pcnt
1750218163	13.18 Volt	21.5 C	10 Pkt	20 Pcnt
1750216363	13.18 Volt	24 C	0 Pkt	11 Pcnt
1750214563	13.18 Volt	24 C	0 Pkt	7 Pcnt
1750212763	13.18 Volt	24 C	20 Pkt	29 Pcnt
1750210963	13.18 Volt	24.5 C	30 Pkt	41 Pcnt
1750209164	13.18 Volt	23.5 C	30 Pkt	45 Pcnt
1750207364	13.18 Volt	23 C	40 Pkt	53 Pcnt
1750205566	13.18 Volt	22.5 C	30 Pkt	53 Pcnt
1750203764	13.18 Volt	21.5 C	20 Pkt	48 Pcnt
1750200164	13.18 Volt	19.5 C	20 Pkt	45 Pcnt
1750198364	13.18 Volt	24.5 C	30 Pkt	49 Pcnt
1750196564	13.18 Volt	23.5 C	20 Pkt	43 Pcnt
1750194764	13.18 Volt	22.5 C	20 Pkt	49 Pcnt
1750192964	13.18 Volt	23 C	20 Pkt	54 Pcnt

*Used Equation Coefficients:

Vin: 0, 0.075, -0.1

Temp: 0, 0.5, -71

Dg1h: 0, 10, 0

Eff1h: 0, 1, 0

A5: 0, 0, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)