This is the latest recevied telemetry packets stored in our database for station/object HS3XMW-1. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | RxTraffic* | TxTraffic* | RxDrop* | RSSI* | Voltage* |
|---|---|---|---|---|---|
| 1750151455 | 14 Pkt | 0 Pkt | 0 Pkt | -63 dBm | 0 V |
| 1750149468 | 13 Pkt | 1 Pkt | 0 Pkt | -60 dBm | 0 V |
| 1750147482 | 10 Pkt | 0 Pkt | 0 Pkt | -63 dBm | 0 V |
| 1750145496 | 16 Pkt | 1 Pkt | 0 Pkt | -63 dBm | 0 V |
| 1750143509 | 9 Pkt | 0 Pkt | 0 Pkt | -62 dBm | 0 V |
| 1750141523 | 7 Pkt | 0 Pkt | 0 Pkt | -62 dBm | 0 V |
| 1750139536 | 16 Pkt | 1 Pkt | 0 Pkt | -62 dBm | 0 V |
| 1750137550 | 13 Pkt | 0 Pkt | 0 Pkt | -65 dBm | 0 V |
| 1750135564 | 15 Pkt | 0 Pkt | 0 Pkt | -63 dBm | 0 V |
| 1750133577 | 10 Pkt | 1 Pkt | 0 Pkt | -63 dBm | 0 V |
| 1750131591 | 12 Pkt | 0 Pkt | 0 Pkt | -63 dBm | 0 V |
| 1750129604 | 12 Pkt | 0 Pkt | 0 Pkt | -64 dBm | 0 V |
| 1750127618 | 12 Pkt | 2 Pkt | 0 Pkt | -65 dBm | 0 V |
| 1750125632 | 13 Pkt | 1 Pkt | 0 Pkt | -64 dBm | 0 V |
| 1750123641 | 16 Pkt | 2 Pkt | 0 Pkt | -63 dBm | 0 V |
| 1750121655 | 24 Pkt | 1 Pkt | 0 Pkt | -64 dBm | 0 V |
| 1750119668 | 23 Pkt | 0 Pkt | 0 Pkt | -62 dBm | 0 V |
| 1750117682 | 17 Pkt | 1 Pkt | 0 Pkt | -63 dBm | 0 V |
| 1750115696 | 16 Pkt | 0 Pkt | 0 Pkt | -63 dBm | 0 V |
| 1750113709 | 24 Pkt | 0 Pkt | 0 Pkt | -63 dBm | 0 V |
| 1750111723 | 22 Pkt | 1 Pkt | 0 Pkt | -62 dBm | 0 V |
| 1750109737 | 17 Pkt | 0 Pkt | 0 Pkt | -62 dBm | 0 V |
| 1750107750 | 18 Pkt | 0 Pkt | 0 Pkt | -62 dBm | 0 V |
| 1750105764 | 27 Pkt | 0 Pkt | 0 Pkt | -62 dBm | 0 V |
| 1750103777 | 69 Pkt | 0 Pkt | 0 Pkt | -62 dBm | 0 V |
*Used Equation Coefficients:
RxTraffic: 0, 1, 0
TxTraffic: 0, 1, 0
RxDrop: 0, 1, 0
RSSI: 0, -1, 0
Voltage: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)