APRS Track Direct

My position About ☰

reset

VK4RBF-3 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object VK4RBF-3. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 >>

Time	Vin*	Rx1h*	Dg1h*	Eff1h*
1754460509	13.62 Volt	170 Pkt	70 Pkt	40 Pcnt
1754458708	13.62 Volt	200 Pkt	100 Pkt	44 Pcnt
1754456908	13.62 Volt	190 Pkt	100 Pkt	42 Pcnt
1754455104	13.62 Volt	180 Pkt	90 Pkt	37 Pcnt
1754453303	13.32 Volt	140 Pkt	80 Pkt	33 Pcnt
1754451502	13.62 Volt	110 Pkt	60 Pkt	29 Pcnt
1754449699	13.62 Volt	130 Pkt	70 Pkt	28 Pcnt
1754447898	13.62 Volt	130 Pkt	70 Pkt	29 Pcnt
1754446096	13.62 Volt	120 Pkt	60 Pkt	31 Pcnt
1754444294	13.62 Volt	120 Pkt	60 Pkt	32 Pcnt
1754442492	13.62 Volt	150 Pkt	70 Pkt	33 Pcnt
1754440691	13.62 Volt	200 Pkt	90 Pkt	34 Pcnt
1754438889	13.62 Volt	180 Pkt	80 Pkt	30 Pcnt
1754437087	13.62 Volt	170 Pkt	70 Pkt	29 Pcnt
1754435285	13.62 Volt	200 Pkt	90 Pkt	31 Pcnt
1754433486	13.62 Volt	200 Pkt	100 Pkt	35 Pcnt
1754431682	13.62 Volt	180 Pkt	100 Pkt	38 Pcnt
1754429880	13.62 Volt	200 Pkt	90 Pkt	35 Pcnt
1754428079	13.54 Volt	220 Pkt	90 Pkt	36 Pcnt
1754426277	13.62 Volt	240 Pkt	90 Pkt	41 Pcnt
1754424475	13.62 Volt	240 Pkt	100 Pkt	39 Pcnt
1754422674	13.62 Volt	200 Pkt	90 Pkt	36 Pcnt
1754420877	13.62 Volt	190 Pkt	80 Pkt	36 Pcnt
1754419070	13.62 Volt	210 Pkt	80 Pkt	38 Pcnt
1754417268	13.62 Volt	210 Pkt	80 Pkt	37 Pcnt

*Used Equation Coefficients:

Vin: 0, 0.074, 0

Rx1h: 0, 10, 0

Dg1h: 0, 10, 0

Eff1h: 0, 1, 0

A5: 0, 0, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)