This is the latest recevied telemetry packets stored in our database for station/object 9W2IHT-7. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | V_Batt* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1763276279 | 4.21 | 0 | 0 | 0 | 0 |
| 1763276203 | 3.53 | 0 | 0 | 0 | 0 |
| 1763276157 | 4.17 | 0 | 0 | 0 | 0 |
| 1763276098 | 4.36 | 0 | 0 | 0 | 0 |
| 1763276048 | 4.36 | 0 | 0 | 0 | 0 |
| 1763276006 | 4.58 | 0 | 0 | 0 | 0 |
| 1763275965 | 4.28 | 0 | 0 | 0 | 0 |
| 1763275917 | 4.02 | 0 | 0 | 0 | 0 |
| 1763275869 | 3.97 | 0 | 0 | 0 | 0 |
| 1763268552 | 3.73 | 0 | 0 | 0 | 0 |
| 1763268510 | 4.23 | 0 | 0 | 0 | 0 |
| 1763268469 | 4.09 | 0 | 0 | 0 | 0 |
| 1763268418 | 4.55 | 0 | 0 | 0 | 0 |
| 1763268236 | 3.7 | 0 | 0 | 0 | 0 |
| 1763268184 | 3.84 | 0 | 0 | 0 | 0 |
| 1763268140 | 4.48 | 0 | 0 | 0 | 0 |
| 1763268093 | 4.46 | 0 | 0 | 0 | 0 |
| 1763268053 | 4.07 | 0 | 0 | 0 | 0 |
| 1763268003 | 4.14 | 0 | 0 | 0 | 0 |
| 1763267951 | 3.71 | 0 | 0 | 0 | 0 |
| 1763267901 | 3.85 | 0 | 0 | 0 | 0 |
| 1763267803 | 3.61 | 0 | 0 | 0 | 0 |
| 1763267760 | 4.54 | 0 | 0 | 0 | 0 |
| 1763267726 | 4.32 | 0 | 0 | 0 | 0 |
| 1763267244 | 4.38 | 0 | 0 | 0 | 0 |
*Used Equation Coefficients:
V_Batt: 0, 0.01, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)