APRS Track Direct

My position About ☰

reset

AE4BA Telemetry

This is the latest recevied telemetry packets stored in our database for station/object AE4BA. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Cpu*	Temp*	FreeM*	RxP*	TxP*
1763276650	0.16 Load	27.8 DegC	436 Mb	1044 Pkt	331 Pkt
1763276351	0.14 Load	27.8 DegC	442 Mb	1027 Pkt	328 Pkt
1763276050	0.14 Load	27.8 DegC	446 Mb	1016 Pkt	348 Pkt
1763275751	0.15 Load	27.8 DegC	435 Mb	1413 Pkt	356 Pkt
1763275450	0.14 Load	27.8 DegC	440 Mb	1691 Pkt	341 Pkt
1763275151	0.11 Load	27.8 DegC	436 Mb	1311 Pkt	327 Pkt
1763274851	0.09 Load	27.8 DegC	442 Mb	1099 Pkt	331 Pkt
1763274550	0.12 Load	27.8 DegC	432 Mb	1503 Pkt	353 Pkt
1763274251	0.1 Load	27.8 DegC	443 Mb	1656 Pkt	322 Pkt
1763273950	0.06 Load	27.8 DegC	446 Mb	1025 Pkt	315 Pkt
1763273651	0.05 Load	27.8 DegC	437 Mb	1589 Pkt	357 Pkt
1763273351	0.05 Load	27.8 DegC	438 Mb	1148 Pkt	329 Pkt
1763273050	0.07 Load	27.8 DegC	447 Mb	1106 Pkt	350 Pkt
1763272751	0.06 Load	27.8 DegC	449 Mb	1175 Pkt	344 Pkt
1763272450	0.08 Load	27.8 DegC	440 Mb	1053 Pkt	337 Pkt
1763272151	0.13 Load	27.8 DegC	447 Mb	1426 Pkt	306 Pkt
1763271851	0.18 Load	27.8 DegC	451 Mb	6003 Pkt	845 Pkt
1763271550	0.11 Load	27.8 DegC	716 Mb	962 Pkt	305 Pkt
1763271251	0.05 Load	27.8 DegC	718 Mb	982 Pkt	323 Pkt
1763270950	0.05 Load	27.8 DegC	724 Mb	936 Pkt	334 Pkt
1763270651	0.08 Load	27.8 DegC	726 Mb	1040 Pkt	323 Pkt
1763270350	0.06 Load	27.8 DegC	725 Mb	1084 Pkt	325 Pkt
1763270051	0.1 Load	27.8 DegC	732 Mb	1251 Pkt	348 Pkt
1763269751	0.09 Load	27.8 DegC	729 Mb	851 Pkt	357 Pkt
1763269450	0.1 Load	27.8 DegC	720 Mb	1070 Pkt	556 Pkt

*Used Equation Coefficients:

Cpu: 0, 0.001, 0

Temp: 0, 0.001, 0

FreeM: 0, 1, 0

RxP: 0, 1, 0

TxP: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)