This is the latest recevied telemetry packets stored in our database for station/object SR2ZYT-1. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Value1* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1794906478 | 61 | 484 | 44 | 413 | 215 |
| 1794904680 | 58 | 477 | 42 | 412 | 215 |
| 1794902882 | 55 | 471 | 40 | 412 | 217 |
| 1794901083 | 51 | 448 | 37 | 412 | 217 |
| 1794899283 | 44 | 430 | 31 | 412 | 218 |
| 1794897484 | 41 | 402 | 29 | 412 | 0 |
| 1794895684 | 38 | 356 | 27 | 412 | 0 |
| 1794893884 | 34 | 332 | 24 | 412 | 0 |
| 1794892086 | 29 | 306 | 20 | 412 | 0 |
| 1794890286 | 26 | 283 | 18 | 412 | 0 |
| 1794888486 | 23 | 262 | 16 | 412 | 0 |
| 1794886687 | 20 | 239 | 14 | 412 | 0 |
| 1794884887 | 17 | 209 | 12 | 412 | 0 |
| 1794883088 | 14 | 182 | 10 | 412 | 0 |
| 1794881287 | 11 | 141 | 8 | 412 | 0 |
| 1794879488 | 8 | 106 | 6 | 412 | 0 |
| 1794877689 | 5 | 76 | 4 | 412 | 0 |
| 1794875890 | 2 | 49 | 2 | 412 | 0 |
| 1794874090 | 130 | 1010 | 91 | 412 | 0 |
| 1794872290 | 127 | 982 | 89 | 413 | 0 |
| 1794870491 | 122 | 953 | 85 | 413 | 0 |
| 1794868691 | 119 | 927 | 83 | 413 | 0 |
| 1794866891 | 116 | 902 | 81 | 413 | 0 |
| 1794865091 | 113 | 871 | 79 | 413 | 0 |
| 1794863293 | 110 | 841 | 77 | 413 | 0 |
*Used Equation Coefficients:
Value1: 0, 1, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)