APRS Track Direct

My position About ☰

reset

HS6KLJ-3 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object HS6KLJ-3. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

Time	RxTraffic*	TxTraffic*	RSSI*	Voltage*
1732285111	0 Pkt	0 Pkt	-46 dBm	0.1 V
1732283252	1 Pkt	0 Pkt	-42 dBm	0.1 V
1732281430	0 Pkt	0 Pkt	-49 dBm	0.1 V
1732279608	0 Pkt	0 Pkt	-48 dBm	0.1 V
1732277786	0 Pkt	0 Pkt	-50 dBm	0.1 V
1732275964	12 Pkt	0 Pkt	-48 dBm	0.1 V
1732274138	11 Pkt	0 Pkt	-45 dBm	0.1 V
1732272315	59 Pkt	1 Pkt	-45 dBm	0.1 V
1732270474	22 Pkt	0 Pkt	-49 dBm	0.1 V
1732268646	11 Pkt	1 Pkt	-44 dBm	0.1 V
1732266823	10 Pkt	4 Pkt	-43 dBm	0.1 V
1732264998	6 Pkt	1 Pkt	-48 dBm	0.1 V
1732263174	12 Pkt	0 Pkt	-43 dBm	0.1 V
1732261350	5 Pkt	2 Pkt	-47 dBm	0.1 V
1732259527	14 Pkt	0 Pkt	-47 dBm	0.1 V
1732257702	9 Pkt	1 Pkt	-43 dBm	0.1 V
1732255879	14 Pkt	3 Pkt	-44 dBm	0.1 V
1732254054	8 Pkt	1 Pkt	-48 dBm	0.1 V
1732252230	13 Pkt	0 Pkt	-49 dBm	0.1 V
1732250407	9 Pkt	0 Pkt	-43 dBm	0.1 V
1732248583	14 Pkt	0 Pkt	-47 dBm	0.1 V
1732246759	10 Pkt	0 Pkt	-47 dBm	0.1 V
1732244934	3 Pkt	0 Pkt	-44 dBm	0.1 V
1732243111	0 Pkt	0 Pkt	-48 dBm	0.1 V

*Used Equation Coefficients:

RxTraffic: 0, 1, 0

TxTraffic: 0, 1, 0

RxDrop: 0, 1, 0

RSSI: 0, -1, 0

Voltage: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)