This is the latest recevied telemetry packets stored in our database for station/object SP8SD. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Vin* | Rx1h* | Dg1h* | Eff1h* | Eff* |
|---|---|---|---|---|---|
| 1764163719 | 9.32 Volt | 60 Pkt | 0 Pkt | 93 Pcnt | 92 Pcnt |
| 1764163419 | 9.32 Volt | 50 Pkt | 0 Pkt | 96 Pcnt | 92 Pcnt |
| 1764163119 | 9.32 Volt | 50 Pkt | 0 Pkt | 96 Pcnt | 92 Pcnt |
| 1764162819 | 9.32 Volt | 40 Pkt | 0 Pkt | 95 Pcnt | 92 Pcnt |
| 1764162519 | 9.32 Volt | 40 Pkt | 0 Pkt | 95 Pcnt | 92 Pcnt |
| 1764162219 | 9.32 Volt | 40 Pkt | 0 Pkt | 93 Pcnt | 92 Pcnt |
| 1764161919 | 9.32 Volt | 40 Pkt | 0 Pkt | 93 Pcnt | 92 Pcnt |
| 1764161619 | 9.32 Volt | 40 Pkt | 0 Pkt | 93 Pcnt | 92 Pcnt |
| 1764161319 | 9.32 Volt | 40 Pkt | 0 Pkt | 93 Pcnt | 92 Pcnt |
| 1764161019 | 9.32 Volt | 30 Pkt | 0 Pkt | 92 Pcnt | 92 Pcnt |
| 1764160719 | 9.32 Volt | 30 Pkt | 0 Pkt | 88 Pcnt | 92 Pcnt |
| 1764160419 | 9.32 Volt | 30 Pkt | 0 Pkt | 88 Pcnt | 92 Pcnt |
| 1764160119 | 9.32 Volt | 30 Pkt | 0 Pkt | 88 Pcnt | 92 Pcnt |
| 1764159819 | 9.32 Volt | 30 Pkt | 0 Pkt | 86 Pcnt | 92 Pcnt |
| 1764159519 | 9.32 Volt | 30 Pkt | 0 Pkt | 86 Pcnt | 92 Pcnt |
| 1764159219 | 9.32 Volt | 30 Pkt | 0 Pkt | 86 Pcnt | 92 Pcnt |
| 1764158919 | 9.32 Volt | 30 Pkt | 0 Pkt | 85 Pcnt | 92 Pcnt |
| 1764158619 | 9.32 Volt | 30 Pkt | 0 Pkt | 82 Pcnt | 92 Pcnt |
| 1764158319 | 9.32 Volt | 30 Pkt | 0 Pkt | 82 Pcnt | 92 Pcnt |
| 1764158019 | 9.32 Volt | 30 Pkt | 0 Pkt | 83 Pcnt | 92 Pcnt |
| 1764157719 | 9.32 Volt | 40 Pkt | 0 Pkt | 85 Pcnt | 92 Pcnt |
| 1764157419 | 9.32 Volt | 40 Pkt | 0 Pkt | 84 Pcnt | 92 Pcnt |
| 1764157119 | 9.32 Volt | 40 Pkt | 0 Pkt | 86 Pcnt | 92 Pcnt |
| 1764156819 | 9.32 Volt | 40 Pkt | 0 Pkt | 88 Pcnt | 92 Pcnt |
| 1764156519 | 9.32 Volt | 40 Pkt | 0 Pkt | 88 Pcnt | 92 Pcnt |
*Used Equation Coefficients:
Vin: 0, 0.079, 0
Rx1h: 0, 10, 0
Dg1h: 0, 10, 0
Eff1h: 0, 1, 0
Eff: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)