This is the latest recevied telemetry packets stored in our database for station/object HS9BZG-9. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Value1* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1779966004 | 474 | 639 | 0 | 0 | 0 |
| 1779965983 | 478 | 639 | 0 | 0 | 0 |
| 1779965928 | 475 | 640 | 0 | 0 | 0 |
| 1779965881 | 473 | 640 | 0 | 0 | 0 |
| 1779965794 | 478 | 639 | 0 | 0 | 0 |
| 1779965689 | 475 | 639 | 0 | 0 | 0 |
| 1779965650 | 473 | 639 | 0 | 0 | 0 |
| 1779965597 | 477 | 639 | 0 | 0 | 0 |
| 1779965482 | 480 | 639 | 0 | 0 | 0 |
| 1779965421 | 478 | 638 | 0 | 0 | 0 |
| 1779965361 | 474 | 638 | 0 | 0 | 0 |
| 1779965306 | 478 | 638 | 0 | 0 | 0 |
| 1779965146 | 477 | 637 | 0 | 0 | 0 |
| 1779964992 | 479 | 635 | 0 | 0 | 0 |
| 1779964947 | 476 | 635 | 0 | 0 | 0 |
| 1779964860 | 475 | 632 | 0 | 0 | 0 |
| 1779964852 | 425 | 632 | 0 | 0 | 0 |
| 1779964755 | 469 | 629 | 0 | 0 | 0 |
| 1779964719 | 475 | 625 | 0 | 0 | 0 |
| 1779964709 | 481 | 624 | 0 | 0 | 0 |
| 1779963757 | 479 | 640 | 0 | 0 | 0 |
| 1779963718 | 479 | 639 | 0 | 0 | 0 |
| 1779963682 | 475 | 639 | 0 | 0 | 0 |
| 1779963633 | 469 | 638 | 0 | 0 | 0 |
| 1779963543 | 481 | 638 | 0 | 0 | 0 |
*Used Equation Coefficients:
Value1: 0, 1, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)