This is the latest recevied telemetry packets stored in our database for station/object SP2GPU-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1770107824 | 205 Count | 250 Count | 137 Count | 4.19 VDC | 0 VDC |
| 1770106924 | 204 Count | 249 Count | 137 Count | 4.18 VDC | 0 VDC |
| 1770106023 | 201 Count | 247 Count | 135 Count | 4.17 VDC | 0 VDC |
| 1770105122 | 199 Count | 245 Count | 134 Count | 4.2 VDC | 0 VDC |
| 1770104221 | 195 Count | 240 Count | 131 Count | 4.21 VDC | 0 VDC |
| 1770103320 | 192 Count | 237 Count | 129 Count | 4.18 VDC | 0 VDC |
| 1770102419 | 189 Count | 232 Count | 127 Count | 4.22 VDC | 0 VDC |
| 1770101518 | 186 Count | 226 Count | 125 Count | 4.18 VDC | 0 VDC |
| 1770100617 | 183 Count | 223 Count | 123 Count | 4.21 VDC | 0 VDC |
| 1770099716 | 174 Count | 205 Count | 115 Count | 4.2 VDC | 0 VDC |
| 1770098815 | 171 Count | 200 Count | 113 Count | 4.17 VDC | 0 VDC |
| 1770097914 | 169 Count | 196 Count | 112 Count | 4.21 VDC | 0 VDC |
| 1770097013 | 163 Count | 186 Count | 107 Count | 4.18 VDC | 0 VDC |
| 1770096112 | 155 Count | 175 Count | 100 Count | 4.19 VDC | 0 VDC |
| 1770095212 | 152 Count | 173 Count | 98 Count | 4.19 VDC | 0 VDC |
| 1770094311 | 150 Count | 169 Count | 97 Count | 4.18 VDC | 0 VDC |
| 1770093410 | 146 Count | 163 Count | 94 Count | 4.18 VDC | 0 VDC |
| 1770092509 | 143 Count | 157 Count | 92 Count | 4.17 VDC | 0 VDC |
| 1770091608 | 141 Count | 154 Count | 91 Count | 4.2 VDC | 0 VDC |
| 1770090707 | 138 Count | 150 Count | 89 Count | 4.22 VDC | 0 VDC |
| 1770089807 | 132 Count | 141 Count | 84 Count | 4.17 VDC | 0 VDC |
| 1770088906 | 129 Count | 135 Count | 82 Count | 4.22 VDC | 0 VDC |
| 1770088005 | 125 Count | 130 Count | 79 Count | 4.2 VDC | 0 VDC |
| 1770087104 | 123 Count | 124 Count | 78 Count | 4.19 VDC | 0 VDC |
| 1770086203 | 121 Count | 121 Count | 77 Count | 4.2 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)