APRS Track Direct

My position About ☰

reset

YM6KTK-3 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object YM6KTK-3. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	RxTraffic*	RxDrop*	RSSI*	Voltage*
1774153126	35 Pkt	10 Pkt	-59 dBm	0.04 V
1774152396	29 Pkt	4 Pkt	-60 dBm	0.04 V
1774151666	36 Pkt	0 Pkt	-59 dBm	0.04 V
1774150936	27 Pkt	0 Pkt	-62 dBm	0.04 V
1774150206	38 Pkt	0 Pkt	-59 dBm	0.04 V
1774149476	33 Pkt	0 Pkt	-58 dBm	0.04 V
1774148746	41 Pkt	0 Pkt	-61 dBm	0.04 V
1774148016	36 Pkt	0 Pkt	-59 dBm	0.04 V
1774147286	35 Pkt	0 Pkt	-59 dBm	0.04 V
1774146556	40 Pkt	0 Pkt	-61 dBm	0.04 V
1774145826	38 Pkt	0 Pkt	-61 dBm	0.04 V
1774145096	39 Pkt	0 Pkt	-62 dBm	0.04 V
1774144366	34 Pkt	0 Pkt	-59 dBm	0.04 V
1774143636	36 Pkt	0 Pkt	-61 dBm	0.04 V
1774142905	35 Pkt	0 Pkt	-58 dBm	0.04 V
1774142175	34 Pkt	0 Pkt	-63 dBm	0.04 V
1774141445	34 Pkt	0 Pkt	-62 dBm	0.04 V
1774140715	32 Pkt	0 Pkt	-61 dBm	0.04 V
1774139985	36 Pkt	0 Pkt	-63 dBm	0.04 V
1774139255	30 Pkt	0 Pkt	-58 dBm	0.04 V
1774138525	45 Pkt	0 Pkt	-62 dBm	0.04 V
1774137795	37 Pkt	0 Pkt	-59 dBm	0.04 V
1774137065	34 Pkt	0 Pkt	-57 dBm	0.04 V
1774136335	35 Pkt	0 Pkt	-63 dBm	0.04 V
1774135605	36 Pkt	0 Pkt	-59 dBm	0.04 V

*Used Equation Coefficients:

RxTraffic: 0, 1, 0

TxTraffic: 0, 1, 0

RxDrop: 0, 1, 0

RSSI: 0, -1, 0

Voltage: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)