This is the latest recevied telemetry packets stored in our database for station/object OZ9DIC-1. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Avg 10m* | Avg 10m* | RxPkts* | IGateDropRx* | TxPkts* |
|---|---|---|---|---|---|
| 1794908986 | 0 Rx Erlang | 0 Tx Erlang | 0 count/10m | 0 count/10m | 0 count/10m |
| 1794907787 | 0 Rx Erlang | 0 Tx Erlang | 0 count/10m | 0 count/10m | 0 count/10m |
| 1794906585 | 0 Rx Erlang | 0 Tx Erlang | 0 count/10m | 0 count/10m | 0 count/10m |
| 1794905384 | 0 Rx Erlang | 0 Tx Erlang | 0 count/10m | 0 count/10m | 0 count/10m |
| 1794904189 | 0 Rx Erlang | 0 Tx Erlang | 0 count/10m | 0 count/10m | 0 count/10m |
| 1794902988 | 0 Rx Erlang | 0 Tx Erlang | 0 count/10m | 0 count/10m | 0 count/10m |
| 1794901789 | 0 Rx Erlang | 0 Tx Erlang | 0 count/10m | 0 count/10m | 0 count/10m |
| 1794900586 | 0 Rx Erlang | 0 Tx Erlang | 0 count/10m | 0 count/10m | 0 count/10m |
| 1794899387 | 0 Rx Erlang | 0 Tx Erlang | 0 count/10m | 0 count/10m | 0 count/10m |
| 1794898189 | 0 Rx Erlang | 0 Tx Erlang | 0 count/10m | 0 count/10m | 0 count/10m |
| 1794896989 | 0 Rx Erlang | 0 Tx Erlang | 0 count/10m | 0 count/10m | 0 count/10m |
| 1794895789 | 0 Rx Erlang | 0 Tx Erlang | 0 count/10m | 0 count/10m | 0 count/10m |
| 1794894589 | 0 Rx Erlang | 0 Tx Erlang | 0 count/10m | 0 count/10m | 0 count/10m |
| 1794893389 | 0 Rx Erlang | 0 Tx Erlang | 0 count/10m | 0 count/10m | 0 count/10m |
| 1794892189 | 0 Rx Erlang | 0 Tx Erlang | 0 count/10m | 0 count/10m | 0 count/10m |
| 1794890989 | 0 Rx Erlang | 0 Tx Erlang | 0 count/10m | 0 count/10m | 0 count/10m |
| 1794889785 | 0 Rx Erlang | 0 Tx Erlang | 0 count/10m | 0 count/10m | 0 count/10m |
| 1794888589 | 0 Rx Erlang | 0 Tx Erlang | 0 count/10m | 0 count/10m | 0 count/10m |
*Used Equation Coefficients:
Avg 10m: 0, 0.005, 0
Avg 10m: 0, 0.005, 0
RxPkts: 0, 1, 0
IGateDropRx: 0, 1, 0
TxPkts: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)