APRS Track Direct

My position About ☰

reset

IQ3MF-11 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object IQ3MF-11. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Rx10m*	Rx1h*	Dg10m*	DgR*	Eff*
1836274701	180 Pkt	1150 Pkt	6 Pkt	3.11 Pcnt	74 Pcnt
1836274551	182 Pkt	1150 Pkt	9 Pkt	3.11 Pcnt	74 Pcnt
1836274401	171 Pkt	1130 Pkt	5 Pkt	3.11 Pcnt	74 Pcnt
1836274251	170 Pkt	1160 Pkt	11 Pkt	3.11 Pcnt	74 Pcnt
1836274101	180 Pkt	1130 Pkt	4 Pkt	3.11 Pcnt	74 Pcnt
1770130704	123 Pkt	740 Pkt	1 Pkt	1.32 Pcnt	80 Pcnt
1770130404	121 Pkt	740 Pkt	1 Pkt	1.32 Pcnt	80 Pcnt
1770130104	118 Pkt	740 Pkt	1 Pkt	1.32 Pcnt	80 Pcnt
1770129804	113 Pkt	730 Pkt	1 Pkt	1.32 Pcnt	80 Pcnt
1770129504	122 Pkt	740 Pkt	1 Pkt	1.32 Pcnt	80 Pcnt
1770129204	109 Pkt	730 Pkt	1 Pkt	1.32 Pcnt	80 Pcnt
1770128904	102 Pkt	730 Pkt	1 Pkt	1.32 Pcnt	80 Pcnt
1770128604	109 Pkt	740 Pkt	1 Pkt	1.32 Pcnt	80 Pcnt
1770128304	110 Pkt	740 Pkt	1 Pkt	1.32 Pcnt	80 Pcnt
1770128004	105 Pkt	750 Pkt	1 Pkt	1.32 Pcnt	80 Pcnt
1770127704	106 Pkt	760 Pkt	1 Pkt	1.32 Pcnt	80 Pcnt
1770127404	125 Pkt	790 Pkt	1 Pkt	1.32 Pcnt	80 Pcnt
1770127104	128 Pkt	790 Pkt	1 Pkt	1.32 Pcnt	80 Pcnt
1770126804	104 Pkt	780 Pkt	1 Pkt	1.32 Pcnt	80 Pcnt
1770126504	108 Pkt	780 Pkt	1 Pkt	1.32 Pcnt	80 Pcnt
1770126204	117 Pkt	780 Pkt	1 Pkt	1.32 Pcnt	80 Pcnt
1770125904	112 Pkt	770 Pkt	1 Pkt	1.32 Pcnt	80 Pcnt
1770125604	120 Pkt	790 Pkt	1 Pkt	1.32 Pcnt	80 Pcnt
1770125304	122 Pkt	800 Pkt	1 Pkt	1.32 Pcnt	80 Pcnt
1770125004	125 Pkt	800 Pkt	1 Pkt	1.32 Pcnt	80 Pcnt

*Used Equation Coefficients:

Rx10m: 0, 1, 0

Rx1h: 0, 10, 0

Dg10m: 0, 1, 0

DgR: 0, 0.001, 0

Eff: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)