This is the latest recevied telemetry packets stored in our database for station/object WA6ODP-3. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Value1* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1792144550 | 10.28 | 344.62 | 451 | 684 | 0 |
| 1792144124 | 10.23 | 344.62 | 456 | 684 | 0 |
| 1792142750 | 10.28 | 346.37 | 456 | 686 | 0 |
| 1792142325 | 10.28 | 347.25 | 462 | 686 | 0 |
| 1792140952 | 10.28 | 351.65 | 462 | 690 | 0 |
| 1792140524 | 10.28 | 353.41 | 462 | 692 | 0 |
| 1792139152 | 10.26 | 357.8 | 467 | 698 | 0 |
| 1792138725 | 10.28 | 358.68 | 467 | 699 | 0 |
| 1792137353 | 10.26 | 362.2 | 467 | 701 | 0 |
| 1792136924 | 10.28 | 364.83 | 467 | 702 | 0 |
| 1792135553 | 10.28 | 368.35 | 472 | 707 | 0 |
| 1792135125 | 10.26 | 371.86 | 472 | 709 | 0 |
| 1792133755 | 10.28 | 376.26 | 478 | 716 | 0 |
| 1792133324 | 10.23 | 378.02 | 478 | 718 | 0 |
| 1792131956 | 10.28 | 385.05 | 483 | 725 | 0 |
| 1792131524 | 10.28 | 385.93 | 483 | 727 | 0 |
| 1792130157 | 10.28 | 390.32 | 483 | 734 | 0 |
| 1792129724 | 10.26 | 391.2 | 483 | 735 | 0 |
| 1792128357 | 10.26 | 392.08 | 489 | 736 | 0 |
| 1792127925 | 10.23 | 393.84 | 494 | 736 | 0 |
| 1792126559 | 10.23 | 399.11 | 483 | 741 | 0 |
| 1792126124 | 351 | 978 | 494 | 742 | 0 |
| 1792124759 | 351 | 985 | 494 | 746 | 0 |
| 1792124324 | 350 | 986 | 494 | 750 | 0 |
*Used Equation Coefficients:
Value1: 0, 0.0293, 0
Value2: 0, 0.879, -459.67
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)