APRS Track Direct

My position About ☰

reset

SR8RJS-1 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object SR8RJS-1. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Vin*	Rx10min*	Rx1h*	EfTot*
1778040116	14.38 Volt	80 Pkt	40 Pkt	48 Pcnt
1778039216	14.38 Volt	50 Pkt	30 Pkt	47 Pcnt
1778038677	14.38 Volt	60 Pkt	40 Pkt	47 Pcnt
1778038316	14.38 Volt	50 Pkt	40 Pkt	47 Pcnt
1778037416	14.38 Volt	80 Pkt	40 Pkt	47 Pcnt
1778036517	14.38 Volt	40 Pkt	40 Pkt	46 Pcnt
1778035617	14.38 Volt	60 Pkt	50 Pkt	45 Pcnt
1778035317	14.38 Volt	80 Pkt	50 Pkt	45 Pcnt
1778034717	14.38 Volt	50 Pkt	40 Pkt	46 Pcnt
1778033817	14.38 Volt	40 Pkt	40 Pkt	45 Pcnt
1778033637	14.46 Volt	90 Pkt	40 Pkt	45 Pcnt
1778032917	14.38 Volt	90 Pkt	30 Pkt	45 Pcnt
1778032017	14.38 Volt	50 Pkt	30 Pkt	44 Pcnt
1778031957	14.38 Volt	50 Pkt	30 Pkt	44 Pcnt
1778031117	14.38 Volt	40 Pkt	30 Pkt	46 Pcnt
1778030278	14.38 Volt	70 Pkt	30 Pkt	47 Pcnt
1778030217	14.38 Volt	70 Pkt	30 Pkt	47 Pcnt
1778029317	14.46 Volt	40 Pkt	30 Pkt	47 Pcnt
1778028598	14.46 Volt	50 Pkt	30 Pkt	47 Pcnt
1778028417	14.38 Volt	40 Pkt	30 Pkt	48 Pcnt
1778027517	14.38 Volt	40 Pkt	30 Pkt	49 Pcnt
1778026918	14.46 Volt	40 Pkt	30 Pkt	49 Pcnt
1778026617	14.38 Volt	40 Pkt	30 Pkt	48 Pcnt
1778025717	14.38 Volt	70 Pkt	30 Pkt	48 Pcnt
1778025238	14.38 Volt	80 Pkt	40 Pkt	48 Pcnt

*Used Equation Coefficients:

Vin: 0, 0.079, 0

Rx10min: 0, 10, 0

Rx1h: 0, 10, 0

DIG10m: 0, 1, 0

EfTot: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)