APRS Track Direct

My position About ☰

reset

VK5RPA-1 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object VK5RPA-1. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 >>

Time	Vin*	Rx1h*	Dig1h*	Eff1h*	Temp*
1754240711	13.8 Volt	2 Pkt	1 Pkt	78 Pcnt	12 C
1754238909	13.8 Volt	2 Pkt	1 Pkt	78 Pcnt	12.5 C
1754237107	13.8 Volt	2 Pkt	1 Pkt	66 Pcnt	13 C
1754235306	13.73 Volt	2 Pkt	1 Pkt	75 Pcnt	13.5 C
1754233504	13.73 Volt	2 Pkt	1 Pkt	91 Pcnt	13.5 C
1754231702	13.73 Volt	2 Pkt	1 Pkt	100 Pcnt	14 C
1754229900	13.73 Volt	2 Pkt	1 Pkt	100 Pcnt	14 C
1754228099	13.73 Volt	2 Pkt	1 Pkt	100 Pcnt	14.5 C
1754226297	13.73 Volt	2 Pkt	1 Pkt	100 Pcnt	14.5 C
1754224495	13.73 Volt	2 Pkt	1 Pkt	100 Pcnt	14.5 C
1754222693	13.73 Volt	2 Pkt	1 Pkt	100 Pcnt	14.5 C
1754220892	13.73 Volt	2 Pkt	1 Pkt	100 Pcnt	14.5 C
1754219090	13.73 Volt	2 Pkt	1 Pkt	100 Pcnt	15 C
1754217288	13.73 Volt	2 Pkt	1 Pkt	100 Pcnt	14.5 C
1754215487	13.73 Volt	2 Pkt	1 Pkt	100 Pcnt	15 C
1754213685	13.73 Volt	2 Pkt	1 Pkt	100 Pcnt	15.5 C
1754211883	13.73 Volt	2 Pkt	1 Pkt	100 Pcnt	16.5 C
1754210081	13.73 Volt	2 Pkt	1 Pkt	100 Pcnt	17.5 C
1754208280	13.73 Volt	2 Pkt	1 Pkt	100 Pcnt	18.5 C
1754206478	13.8 Volt	2 Pkt	1 Pkt	100 Pcnt	19.5 C
1754204676	13.88 Volt	2 Pkt	1 Pkt	100 Pcnt	20 C
1754202874	14.33 Volt	2 Pkt	1 Pkt	100 Pcnt	20.5 C
1754201073	14.93 Volt	2 Pkt	1 Pkt	100 Pcnt	21 C
1754199271	14.93 Volt	2 Pkt	1 Pkt	100 Pcnt	21 C
1754197469	13.8 Volt	2 Pkt	1 Pkt	100 Pcnt	20.5 C

*Used Equation Coefficients:

Vin: 0, 0.075, 0

Rx1h: 0, 1, 0

Dig1h: 0, 1, 0

Eff1h: 0, 1, 0

Temp: 0, 0.5, -62

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)