This is the latest recevied telemetry packets stored in our database for station/object HS6NYW-3. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | RxTraffic* | TxTraffic* | RxDrop* | RSSI* | SUN* |
|---|---|---|---|---|---|
| 1778052713 | 0 Pkt | 18 Pkt | 0 Pkt | -66 dBm | 0 % |
| 1778052090 | 0 Pkt | 19 Pkt | 0 Pkt | -65 dBm | 0 % |
| 1778051466 | 0 Pkt | 19 Pkt | 0 Pkt | -66 dBm | 0 % |
| 1778050844 | 0 Pkt | 9 Pkt | 0 Pkt | -65 dBm | 0 % |
| 1778050221 | 0 Pkt | 29 Pkt | 0 Pkt | -65 dBm | 0 % |
| 1778049598 | 0 Pkt | 19 Pkt | 0 Pkt | -65 dBm | 0 % |
| 1778048975 | 0 Pkt | 19 Pkt | 0 Pkt | -65 dBm | 0 % |
| 1778048352 | 0 Pkt | 18 Pkt | 0 Pkt | -65 dBm | 0 % |
| 1778047729 | 0 Pkt | 19 Pkt | 0 Pkt | -64 dBm | 0 % |
| 1778047107 | 0 Pkt | 23 Pkt | 0 Pkt | -65 dBm | 0 % |
| 1778046483 | 0 Pkt | 16 Pkt | 0 Pkt | -65 dBm | 0 % |
| 1778045861 | 0 Pkt | 16 Pkt | 0 Pkt | -67 dBm | 0 % |
| 1778045239 | 0 Pkt | 20 Pkt | 0 Pkt | -65 dBm | 0 % |
| 1778044616 | 0 Pkt | 41 Pkt | 0 Pkt | -64 dBm | 0 % |
| 1778043993 | 0 Pkt | 58 Pkt | 0 Pkt | -64 dBm | 0 % |
| 1778043369 | 0 Pkt | 22 Pkt | 0 Pkt | -64 dBm | 0 % |
| 1778042746 | 0 Pkt | 22 Pkt | 0 Pkt | -64 dBm | 0 % |
| 1778042123 | 0 Pkt | 45 Pkt | 0 Pkt | -64 dBm | 0 % |
| 1778041500 | 0 Pkt | 41 Pkt | 0 Pkt | -64 dBm | 0 % |
| 1778040877 | 0 Pkt | 46 Pkt | 0 Pkt | -64 dBm | 0 % |
| 1778040251 | 0 Pkt | 24 Pkt | 0 Pkt | -64 dBm | 0 % |
| 1778039628 | 0 Pkt | 48 Pkt | 0 Pkt | -62 dBm | 0 % |
| 1778039004 | 0 Pkt | 60 Pkt | 0 Pkt | -65 dBm | 0 % |
| 1778038380 | 0 Pkt | 65 Pkt | 0 Pkt | -65 dBm | 0 % |
| 1778037754 | 0 Pkt | 67 Pkt | 0 Pkt | -66 dBm | 0 % |
*Used Equation Coefficients:
RxTraffic: 0, 1, 0
TxTraffic: 0, 1, 0
RxDrop: 0, 1, 0
RSSI: 0, -1, 0
SUN: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)