This is the latest recevied telemetry packets stored in our database for station/object VK4RMM-3. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Value1* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1794914367 | 152 | 165 | 163 | 0 | 0 |
| 1794912518 | 152 | 165 | 163 | 0 | 0 |
| 1794910663 | 152 | 165 | 163 | 0 | 0 |
| 1794908815 | 152 | 165 | 164 | 0 | 0 |
| 1794906964 | 154 | 166 | 164 | 0 | 0 |
| 1794905111 | 154 | 166 | 164 | 0 | 0 |
| 1794903272 | 156 | 167 | 165 | 0 | 0 |
| 1794901418 | 156 | 167 | 166 | 0 | 0 |
| 1794899567 | 157 | 168 | 168 | 0 | 0 |
| 1794897709 | 158 | 167 | 171 | 0 | 0 |
| 1794895865 | 158 | 169 | 173 | 0 | 0 |
| 1794894020 | 158 | 170 | 172 | 0 | 0 |
| 1794892171 | 158 | 170 | 170 | 0 | 0 |
| 1794890325 | 157 | 169 | 170 | 0 | 0 |
| 1794888484 | 158 | 169 | 173 | 0 | 0 |
| 1794886629 | 157 | 169 | 171 | 0 | 0 |
| 1794884789 | 157 | 169 | 170 | 0 | 0 |
| 1794882934 | 157 | 169 | 171 | 0 | 0 |
| 1794881093 | 157 | 171 | 175 | 0 | 0 |
| 1794879239 | 156 | 185 | 170 | 0 | 0 |
| 1794877396 | 156 | 184 | 171 | 0 | 0 |
| 1794875544 | 155 | 184 | 170 | 0 | 0 |
| 1794873693 | 155 | 184 | 183 | 0 | 0 |
| 1794871828 | 154 | 182 | 179 | 0 | 0 |
| 1794869972 | 154 | 184 | 180 | 0 | 0 |
*Used Equation Coefficients:
Value1: 0, 1, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)