This is the latest recevied telemetry packets stored in our database for station/object EA1BVF-3. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Value1* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1794908214 | 1 | 0 | 75 | 152 | 144 |
| 1794863644 | 39 | 0 | 80 | 156 | 145 |
| 1794862443 | 42 | 0 | 80 | 159 | 145 |
| 1794861242 | 44 | 0 | 80 | 161 | 145 |
| 1794860041 | 47 | 0 | 80 | 163 | 145 |
| 1794858839 | 47 | 0 | 80 | 168 | 145 |
| 1794857638 | 51 | 0 | 80 | 170 | 145 |
| 1794856437 | 55 | 0 | 80 | 176 | 145 |
| 1794855236 | 57 | 0 | 80 | 177 | 144 |
| 1794854035 | 55 | 0 | 80 | 177 | 144 |
| 1794852834 | 56 | 0 | 80 | 178 | 144 |
| 1794851633 | 66 | 0 | 79 | 179 | 144 |
| 1794850432 | 71 | 0 | 79 | 179 | 144 |
| 1794849231 | 72 | 0 | 79 | 180 | 144 |
| 1794848029 | 64 | 0 | 80 | 181 | 144 |
| 1794846828 | 63 | 0 | 80 | 182 | 144 |
| 1794845627 | 61 | 0 | 80 | 183 | 144 |
| 1794844426 | 62 | 1 | 80 | 183 | 144 |
| 1794843225 | 62 | 1 | 80 | 184 | 144 |
| 1794842023 | 65 | 1 | 80 | 185 | 144 |
| 1794840822 | 64 | 1 | 79 | 187 | 144 |
| 1794839621 | 63 | 1 | 79 | 191 | 144 |
| 1794838420 | 61 | 1 | 79 | 195 | 144 |
| 1794837219 | 60 | 1 | 79 | 192 | 144 |
| 1794836018 | 63 | 3 | 79 | 194 | 144 |
*Used Equation Coefficients:
Value1: 0, 1, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)