APRS Track Direct

My position About ☰

reset

DB0HFT-10 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object DB0HFT-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 >>

Time	Avg 10m*	Avg 10m*	RxPkts*	IGateDropRx*	TxPkts*
1790654759	0.24 Rx Erlang	0.01 Tx Erlang	226 count/10m	11 count/10m	12 count/10m
1790653559	0.21 Rx Erlang	0.02 Tx Erlang	203 count/10m	33 count/10m	14 count/10m
1790652359	0.24 Rx Erlang	0.01 Tx Erlang	229 count/10m	17 count/10m	13 count/10m
1790651159	0.3 Rx Erlang	0.02 Tx Erlang	285 count/10m	120 count/10m	20 count/10m
1790649959	0.29 Rx Erlang	0.03 Tx Erlang	287 count/10m	123 count/10m	19 count/10m
1790648759	0.37 Rx Erlang	0.07 Tx Erlang	367 count/10m	157 count/10m	63 count/10m
1790647559	0.23 Rx Erlang	0.02 Tx Erlang	218 count/10m	41 count/10m	18 count/10m
1790646359	0.26 Rx Erlang	0.02 Tx Erlang	214 count/10m	20 count/10m	13 count/10m
1790645159	0.16 Rx Erlang	0.01 Tx Erlang	146 count/10m	14 count/10m	10 count/10m
1790643959	0.17 Rx Erlang	0.01 Tx Erlang	140 count/10m	15 count/10m	8 count/10m
1790642759	0.22 Rx Erlang	0.01 Tx Erlang	197 count/10m	21 count/10m	9 count/10m
1790641559	0.18 Rx Erlang	0.01 Tx Erlang	158 count/10m	17 count/10m	8 count/10m
1790640359	0.16 Rx Erlang	0.01 Tx Erlang	156 count/10m	9 count/10m	8 count/10m
1790639159	0.18 Rx Erlang	0.01 Tx Erlang	150 count/10m	15 count/10m	8 count/10m
1790637959	0.14 Rx Erlang	0.01 Tx Erlang	130 count/10m	11 count/10m	5 count/10m
1790636759	0.14 Rx Erlang	0.01 Tx Erlang	132 count/10m	15 count/10m	4 count/10m
1790635559	0.15 Rx Erlang	0.01 Tx Erlang	119 count/10m	8 count/10m	6 count/10m
1790634359	0.14 Rx Erlang	0.01 Tx Erlang	115 count/10m	15 count/10m	6 count/10m
1790633159	0.11 Rx Erlang	0.01 Tx Erlang	103 count/10m	13 count/10m	5 count/10m
1790631959	0.08 Rx Erlang	0.01 Tx Erlang	68 count/10m	8 count/10m	7 count/10m
1790630759	0.09 Rx Erlang	0 Tx Erlang	77 count/10m	9 count/10m	3 count/10m
1790629559	0.09 Rx Erlang	0.01 Tx Erlang	85 count/10m	2 count/10m	8 count/10m
1790628359	0.1 Rx Erlang	0.01 Tx Erlang	86 count/10m	8 count/10m	5 count/10m
1790627159	0.1 Rx Erlang	0.01 Tx Erlang	88 count/10m	6 count/10m	6 count/10m
1790625959	0.08 Rx Erlang	0.01 Tx Erlang	78 count/10m	4 count/10m	8 count/10m

*Used Equation Coefficients:

Avg 10m: 0, 0.005, 0

RxPkts: 0, 1, 0

IGateDropRx: 0, 1, 0

TxPkts: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)