APRS Track Direct

My position About ☰

reset

DB0HFT-1 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object DB0HFT-1. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Cpu*	ATx*	FTx*	CPUld*
1763295066	36.4 Grad.C	19.1 Grad.C	20.5 Grad.C	5 perc
1763294484	36.4 Grad.C	19.1 Grad.C	20.2 Grad.C	5 perc
1763293904	36.4 Grad.C	19.2 Grad.C	20.1 Grad.C	5 perc
1763293348	36.4 Grad.C	19.1 Grad.C	20.2 Grad.C	6 perc
1763292771	36.4 Grad.C	19 Grad.C	19.9 Grad.C	6 perc
1763292186	36.4 Grad.C	19 Grad.C	19.8 Grad.C	6 perc
1763291656	36.4 Grad.C	19 Grad.C	19.6 Grad.C	5 perc
1763291172	36.4 Grad.C	19 Grad.C	19.6 Grad.C	6 perc
1763290646	35.9 Grad.C	19 Grad.C	19.9 Grad.C	6 perc
1763290051	36.4 Grad.C	19.3 Grad.C	20.3 Grad.C	6 perc
1763289521	36.4 Grad.C	19.3 Grad.C	20.2 Grad.C	6 perc
1763288926	36.4 Grad.C	19.3 Grad.C	20 Grad.C	5 perc
1763288436	37 Grad.C	19.3 Grad.C	19.8 Grad.C	8 perc
1763287858	37 Grad.C	19.3 Grad.C	19.9 Grad.C	8 perc
1763287347	37 Grad.C	19.4 Grad.C	19.9 Grad.C	6 perc
1763286831	36.4 Grad.C	19.4 Grad.C	19.9 Grad.C	6 perc
1763286236	37 Grad.C	19.4 Grad.C	20 Grad.C	9 perc
1763285682	36.4 Grad.C	19.4 Grad.C	20.2 Grad.C	5 perc
1763285121	36.4 Grad.C	19.4 Grad.C	20.1 Grad.C	5 perc
1763284596	36.4 Grad.C	19.4 Grad.C	20.3 Grad.C	3 perc
1763283999	36.4 Grad.C	19.5 Grad.C	20.3 Grad.C	6 perc
1763283516	36.4 Grad.C	19.5 Grad.C	20.2 Grad.C	5 perc
1763282981	36.4 Grad.C	19.6 Grad.C	20.5 Grad.C	5 perc
1763282386	37 Grad.C	19.6 Grad.C	20.4 Grad.C	6 perc
1763281895	36.4 Grad.C	19.6 Grad.C	20 Grad.C	6 perc

*Used Equation Coefficients:

Cpu: 0, 0.1, 0

ATx: 0, 0.1, 0

FTx: 0, 0.1, 0

CPUld: 0, 1, 0

MEMl: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)