APRS Track Direct

My position About ☰

reset

S55YAR-11 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object S55YAR-11. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Vradio*	Dg1h*	Eff1h*	T*
1753687610	13.68 Volt	480 Pkt	74 Pcnt	13 °C
1753687310	13.76 Volt	490 Pkt	74 Pcnt	13 °C
1753687010	13.76 Volt	500 Pkt	73 Pcnt	13 °C
1753686710	13.76 Volt	490 Pkt	73 Pcnt	13 °C
1753686410	13.76 Volt	500 Pkt	73 Pcnt	13 °C
1753686110	13.76 Volt	500 Pkt	73 Pcnt	13 °C
1753685810	13.76 Volt	490 Pkt	73 Pcnt	13 °C
1753685511	13.68 Volt	480 Pkt	73 Pcnt	13 °C
1753685510	13.68 Volt	480 Pkt	73 Pcnt	13 °C
1753685210	13.76 Volt	480 Pkt	74 Pcnt	13 °C
1753684910	13.76 Volt	470 Pkt	73 Pcnt	13 °C
1753684610	13.76 Volt	470 Pkt	73 Pcnt	13 °C
1753684310	13.76 Volt	470 Pkt	73 Pcnt	13 °C
1753684010	13.76 Volt	470 Pkt	73 Pcnt	13 °C
1753683710	13.76 Volt	470 Pkt	73 Pcnt	13 °C
1753683410	13.76 Volt	470 Pkt	74 Pcnt	13 °C
1753683110	13.76 Volt	480 Pkt	75 Pcnt	13 °C
1753682810	13.76 Volt	480 Pkt	74 Pcnt	13 °C
1753682510	13.76 Volt	480 Pkt	75 Pcnt	13 °C
1753682210	13.76 Volt	480 Pkt	75 Pcnt	13 °C
1753681911	13.76 Volt	470 Pkt	75 Pcnt	13 °C
1753681910	13.76 Volt	470 Pkt	75 Pcnt	13 °C
1753681610	13.76 Volt	470 Pkt	75 Pcnt	13 °C
1753681310	13.76 Volt	460 Pkt	75 Pcnt	13 °C
1753681010	13.76 Volt	460 Pkt	75 Pcnt	13 °C

*Used Equation Coefficients:

Vradio: 0, 0.078226, 0.07

Vkoca: 0, 0.0738, 0

Dg1h: 0, 10, 0

Eff1h: 0, 1, 0

T: 0, 0.5, -64

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)