This is the latest recevied telemetry packets stored in our database for station/object VK4RMM-3. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Value1* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1770184751 | 155 | 168 | 251 | 0 | 0 |
| 1770182933 | 155 | 168 | 251 | 0 | 0 |
| 1770181109 | 156 | 168 | 250 | 0 | 0 |
| 1770179296 | 155 | 168 | 250 | 0 | 0 |
| 1770177484 | 156 | 168 | 251 | 0 | 0 |
| 1770175672 | 155 | 168 | 251 | 0 | 0 |
| 1770173846 | 155 | 168 | 251 | 0 | 0 |
| 1770170200 | 154 | 183 | 253 | 0 | 0 |
| 1770168374 | 153 | 184 | 252 | 0 | 0 |
| 1770166545 | 153 | 183 | 253 | 0 | 0 |
| 1770164724 | 152 | 184 | 253 | 0 | 0 |
| 1770162895 | 151 | 184 | 252 | 0 | 0 |
| 1770161070 | 150 | 183 | 253 | 0 | 0 |
| 1770159223 | 149 | 176 | 252 | 0 | 0 |
| 1770157397 | 148 | 176 | 252 | 0 | 0 |
| 1770155561 | 149 | 170 | 252 | 0 | 0 |
| 1770151891 | 147 | 164 | 251 | 0 | 0 |
| 1770151461 | 147 | 150 | 249 | 0 | 0 |
| 1770151221 | 147 | 162 | 250 | 0 | 0 |
| 1770149393 | 146 | 159 | 250 | 0 | 0 |
| 1770147562 | 147 | 158 | 250 | 0 | 0 |
| 1770145730 | 147 | 158 | 250 | 0 | 0 |
| 1770143899 | 147 | 158 | 250 | 0 | 0 |
| 1770142072 | 147 | 158 | 250 | 0 | 0 |
| 1770140243 | 147 | 159 | 250 | 0 | 0 |
*Used Equation Coefficients:
Value1: 0, 1, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)