APRS Track Direct

My position About ☰

reset

VK2RAY Telemetry

This is the latest recevied telemetry packets stored in our database for station/object VK2RAY. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	CPU Tmp*	Env Tmp*	BattV*	BattI*	Pwr*
1790667840	49 degC	-0 degC	13.56 V	-1.6 A	-21 W
1790667780	49 degC	-0 degC	13.56 V	-1.6 A	-29 W
1790667720	49.5 degC	-0 degC	13.6 V	-1.6 A	-21 W
1790667660	49 degC	-0 degC	13.6 V	-1.6 A	-21 W
1790667600	49 degC	-0 degC	13.64 V	-1.6 A	-21 W
1790667540	49 degC	-0 degC	13.64 V	-1.6 A	-21 W
1790667480	49.5 degC	-0 degC	13.68 V	-1.6 A	-21 W
1790667420	49 degC	-0 degC	13.68 V	-1.6 A	-21 W
1790667360	49.5 degC	-0 degC	13.72 V	-1.6 A	-21 W
1790667300	50.5 degC	-0 degC	13.72 V	-1.6 A	-17 W
1790667240	49.5 degC	-0 degC	13.76 V	-1.6 A	-25 W
1790667180	50.5 degC	-0 degC	13.76 V	-1.6 A	-17 W
1790667120	50.5 degC	-0 degC	13.8 V	-1.6 A	-17 W
1790667060	50.5 degC	-0 degC	13.84 V	-1.2 A	-17 W
1790667000	49.5 degC	-0 degC	13.84 V	-1.2 A	-17 W
1790666940	50.5 degC	-0 degC	13.88 V	-1.2 A	-17 W
1790666880	50.5 degC	-0 degC	13.88 V	-1.2 A	-13 W
1790666820	50.5 degC	-0 degC	13.92 V	-1.2 A	-17 W
1790666760	50.5 degC	-0 degC	13.96 V	-1.2 A	-17 W
1790666700	50.5 degC	-0 degC	14 V	-1.2 A	-13 W
1790666640	51 degC	-0 degC	14 V	-0.8 A	-9 W
1790666580	50.5 degC	-0 degC	14.04 V	-0.8 A	-5 W
1790666520	50.5 degC	-0 degC	14.08 V	-0.4 A	-5 W
1790666460	51 degC	-0 degC	14.12 V	-0.4 A	-1 W
1790666400	51 degC	-0 degC	14.12 V	0 A	-1 W

*Used Equation Coefficients:

CPU Tmp: 0, 0.5, 0

Env Tmp: 0, 0.3333, -10

BattV: 0, 0.04, 9

BattI: 0, 0.4, -50

Pwr: 0, 4, -509

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)