This is the latest recevied telemetry packets stored in our database for station/object MB7UKB-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | CPU* | Used* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1836274845 | 46.16 C | 376 MB | 0 | 0 | 0 |
| 1778038531 | 41.85 C | 254 MB | 0 | 0 | 0 |
| 1778036731 | 43.47 C | 250 MB | 0 | 0 | 0 |
| 1778034931 | 42.93 C | 251 MB | 0 | 0 | 0 |
| 1778033131 | 42.93 C | 253 MB | 0 | 0 | 0 |
| 1778031331 | 43.47 C | 250 MB | 0 | 0 | 0 |
| 1778029531 | 42.93 C | 253 MB | 0 | 0 | 0 |
| 1778027731 | 43.47 C | 255 MB | 0 | 0 | 0 |
| 1778025930 | 43.47 C | 254 MB | 0 | 0 | 0 |
| 1778024131 | 42.93 C | 251 MB | 0 | 0 | 0 |
| 1778022330 | 43.47 C | 255 MB | 0 | 0 | 0 |
| 1778020530 | 42.93 C | 252 MB | 0 | 0 | 0 |
| 1778018730 | 43.47 C | 252 MB | 0 | 0 | 0 |
| 1778016930 | 43.47 C | 257 MB | 0 | 0 | 0 |
| 1778015130 | 43.47 C | 258 MB | 0 | 0 | 0 |
| 1778013330 | 43.47 C | 256 MB | 0 | 0 | 0 |
| 1778011530 | 44 C | 253 MB | 0 | 0 | 0 |
| 1778009730 | 44 C | 260 MB | 0 | 0 | 0 |
| 1778007936 | 44 C | 256 MB | 0 | 0 | 0 |
| 1778006130 | 42.93 C | 258 MB | 0 | 0 | 0 |
| 1778004330 | 43.47 C | 255 MB | 0 | 0 | 0 |
| 1778002530 | 44 C | 261 MB | 0 | 0 | 0 |
| 1778000730 | 42.93 C | 261 MB | 0 | 0 | 0 |
| 1777998930 | 44 C | 254 MB | 0 | 0 | 0 |
| 1777997130 | 44 C | 255 MB | 0 | 0 | 0 |
*Used Equation Coefficients:
CPU: 0, 0.01, 0
Used: 0, 1, 0
Value3: 0, 0, 0
Value4: 0, 0, 0
Value5: 0, 0, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)