APRS Track Direct

My position About ☰

reset

WILLAM Telemetry

This is the latest recevied telemetry packets stored in our database for station/object WILLAM. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 >>

Time	Avg 10m*	Avg 10m*	RxPkts*	IGateDropRx*	TxPkts*
1786737968	0.06 Rx Erlang	0.02 Tx Erlang	59 count/10m	7 count/10m	24 count/10m
1786736768	0.06 Rx Erlang	0.02 Tx Erlang	70 count/10m	6 count/10m	25 count/10m
1786735568	0.07 Rx Erlang	0.03 Tx Erlang	69 count/10m	6 count/10m	29 count/10m
1786734368	0.08 Rx Erlang	0.03 Tx Erlang	75 count/10m	10 count/10m	25 count/10m
1786733168	0.07 Rx Erlang	0.03 Tx Erlang	72 count/10m	12 count/10m	24 count/10m
1786731968	0.07 Rx Erlang	0.03 Tx Erlang	61 count/10m	10 count/10m	22 count/10m
1786730768	0.07 Rx Erlang	0.02 Tx Erlang	59 count/10m	14 count/10m	18 count/10m
1786729568	0.07 Rx Erlang	0.03 Tx Erlang	71 count/10m	10 count/10m	26 count/10m
1786728368	0.06 Rx Erlang	0.02 Tx Erlang	57 count/10m	9 count/10m	19 count/10m
1786727168	0.07 Rx Erlang	0.02 Tx Erlang	67 count/10m	10 count/10m	19 count/10m
1786725968	0.07 Rx Erlang	0.02 Tx Erlang	63 count/10m	10 count/10m	21 count/10m
1786724768	0.06 Rx Erlang	0.02 Tx Erlang	45 count/10m	8 count/10m	17 count/10m
1786723568	0.05 Rx Erlang	0.02 Tx Erlang	53 count/10m	7 count/10m	20 count/10m
1786722368	0.09 Rx Erlang	0.03 Tx Erlang	74 count/10m	10 count/10m	30 count/10m
1786721168	0.06 Rx Erlang	0.03 Tx Erlang	49 count/10m	8 count/10m	21 count/10m
1786719968	0.05 Rx Erlang	0.02 Tx Erlang	44 count/10m	7 count/10m	16 count/10m
1786718768	0.05 Rx Erlang	0.02 Tx Erlang	46 count/10m	11 count/10m	15 count/10m
1786717568	0.05 Rx Erlang	0.02 Tx Erlang	50 count/10m	9 count/10m	18 count/10m
1786716368	0.06 Rx Erlang	0.02 Tx Erlang	55 count/10m	11 count/10m	20 count/10m
1786715168	0.06 Rx Erlang	0.02 Tx Erlang	50 count/10m	7 count/10m	21 count/10m
1786713968	0.06 Rx Erlang	0.02 Tx Erlang	53 count/10m	7 count/10m	19 count/10m
1786712768	0.07 Rx Erlang	0.02 Tx Erlang	58 count/10m	10 count/10m	20 count/10m
1786711568	0.05 Rx Erlang	0.02 Tx Erlang	41 count/10m	10 count/10m	16 count/10m
1786710368	0.05 Rx Erlang	0.02 Tx Erlang	43 count/10m	7 count/10m	16 count/10m
1786709168	0.06 Rx Erlang	0.02 Tx Erlang	52 count/10m	9 count/10m	17 count/10m

*Used Equation Coefficients:

Avg 10m: 0, 0.005, 0

RxPkts: 0, 1, 0

IGateDropRx: 0, 1, 0

TxPkts: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)