APRS Track Direct

My position About ☰

reset

VK2HIM-1 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object VK2HIM-1. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 >>

Time	Vin*	Rx1h*	Dg1h*	Eff1h*	Dg10m*
1778049908	13.23 Volt	0 Pkt	0 Pkt	0 Pcnt	0 Pkt
1778048108	13.23 Volt	0 Pkt	0 Pkt	0 Pcnt	0 Pkt
1778046308	13.23 Volt	0 Pkt	0 Pkt	0 Pcnt	0 Pkt
1778044508	13.23 Volt	0 Pkt	0 Pkt	0 Pcnt	0 Pkt
1778042708	13.23 Volt	0 Pkt	0 Pkt	0 Pcnt	0 Pkt
1778040908	13.23 Volt	0 Pkt	0 Pkt	0 Pcnt	0 Pkt
1778039108	13.23 Volt	0 Pkt	0 Pkt	0 Pcnt	0 Pkt
1778037308	13.23 Volt	0 Pkt	0 Pkt	0 Pcnt	0 Pkt
1778035508	13.23 Volt	0 Pkt	0 Pkt	0 Pcnt	0 Pkt
1778033708	13.23 Volt	0 Pkt	0 Pkt	0 Pcnt	0 Pkt
1778031909	13.15 Volt	0 Pkt	0 Pkt	52 Pcnt	0 Pkt
1778030109	13.15 Volt	10 Pkt	10 Pkt	62 Pcnt	2 Pkt
1778028309	13.15 Volt	0 Pkt	0 Pkt	12 Pcnt	1 Pkt
1778026509	13.15 Volt	0 Pkt	0 Pkt	0 Pcnt	0 Pkt
1778024709	13.15 Volt	0 Pkt	0 Pkt	0 Pcnt	0 Pkt
1778022909	13.15 Volt	0 Pkt	0 Pkt	0 Pcnt	0 Pkt
1778021109	13.15 Volt	0 Pkt	0 Pkt	0 Pcnt	0 Pkt
1778019309	13.15 Volt	0 Pkt	0 Pkt	0 Pcnt	0 Pkt
1778017509	13.15 Volt	0 Pkt	0 Pkt	0 Pcnt	0 Pkt
1778015709	13.15 Volt	0 Pkt	0 Pkt	0 Pcnt	0 Pkt
1778013909	13.15 Volt	0 Pkt	0 Pkt	0 Pcnt	0 Pkt
1778012109	13.15 Volt	0 Pkt	0 Pkt	1 Pcnt	0 Pkt
1778010309	13.15 Volt	0 Pkt	0 Pkt	6 Pcnt	0 Pkt
1778008509	13.15 Volt	10 Pkt	0 Pkt	10 Pcnt	1 Pkt
1778006710	13.15 Volt	0 Pkt	0 Pkt	7 Pcnt	1 Pkt

*Used Equation Coefficients:

Vin: 0, 0.074737, 0

Rx1h: 0, 10, 0

Dg1h: 0, 10, 0

Eff1h: 0, 1, 0

Dg10m: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)