This is the latest recevied telemetry packets stored in our database for station/object OE3FJB-29. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | PV-in* | Akku* | T1* | T2* | T3* |
|---|---|---|---|---|---|
| 1732291078 | 0 Volt | 3.78 Volt | 0 C | 0 C | 0 C |
| 1732290479 | 0.08 Volt | 3.79 Volt | 0 C | 0 C | 0 C |
| 1732289880 | 0.66 Volt | 3.79 Volt | 0 C | 0 C | 0 C |
| 1732289281 | 1.89 Volt | 3.79 Volt | 0 C | 0 C | 0 C |
| 1732288682 | 3.26 Volt | 3.79 Volt | 0 C | 0 C | 0 C |
| 1732288083 | 4.14 Volt | 3.8 Volt | 0 C | 0 C | 0 C |
| 1732287485 | 4.45 Volt | 3.8 Volt | 0 C | 0 C | 0 C |
| 1732286886 | 4.77 Volt | 3.8 Volt | 0 C | 0 C | 0 C |
| 1732286287 | 5.38 Volt | 3.81 Volt | 0 C | 0 C | 0 C |
| 1732285688 | 4.61 Volt | 3.8 Volt | 0 C | 0 C | 0 C |
| 1732285089 | 4.05 Volt | 3.8 Volt | 0 C | 0 C | 0 C |
| 1732284490 | 4.52 Volt | 3.82 Volt | 0 C | 0 C | 0 C |
| 1732283891 | 4.21 Volt | 3.82 Volt | 0 C | 0 C | 0 C |
| 1732283292 | 5.16 Volt | 3.8 Volt | 0 C | 0 C | 0 C |
| 1732282694 | 4.72 Volt | 3.82 Volt | 0 C | 0 C | 0 C |
| 1732282095 | 5.32 Volt | 3.82 Volt | 0 C | 0 C | 0 C |
| 1732281496 | 3.91 Volt | 3.82 Volt | 0 C | 0 C | 0 C |
| 1732280897 | 3.94 Volt | 3.84 Volt | 0 C | 0 C | 0 C |
| 1732280298 | 4.11 Volt | 3.84 Volt | 0 C | 0 C | 0 C |
| 1732279699 | 6.19 Volt | 3.84 Volt | 0 C | 0 C | 0 C |
| 1732279100 | 3.93 Volt | 3.84 Volt | 0 C | 0 C | 0 C |
| 1732278502 | 4.74 Volt | 3.8 Volt | 0 C | 0 C | 0 C |
| 1732277903 | 5.06 Volt | 3.8 Volt | 0 C | 0 C | 0 C |
| 1732277304 | 3.88 Volt | 3.8 Volt | 0 C | 0 C | 0 C |
| 1732276705 | 3.87 Volt | 3.8 Volt | 0 C | 0 C | 0 C |
*Used Equation Coefficients:
PV-in: 0, 0.01, 0
Akku: 0, 0.01, 0
T1: 0, 0, 0
T2: 0, 0, 0
T3: 0, 0, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)