APRS Track Direct

My position About ☰

reset

VK5RTG-1 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object VK5RTG-1. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

Time	Vin*	Rx1hr*	Dig1h*	Eff1h*
1786728480	14.02 Volt	26 Pkt	2 Pkt	94 Pcnt
1786724877	14.02 Volt	28 Pkt	1 Pkt	94 Pcnt
1786721273	14.02 Volt	26 Pkt	1 Pkt	91 Pcnt
1786717670	14.02 Volt	21 Pkt	1 Pkt	88 Pcnt
1786714066	14.02 Volt	22 Pkt	1 Pkt	93 Pcnt
1786710463	14.02 Volt	22 Pkt	1 Pkt	95 Pcnt
1786706860	14.02 Volt	25 Pkt	1 Pkt	93 Pcnt
1786703256	14.02 Volt	35 Pkt	3 Pkt	91 Pcnt
1786699653	14.02 Volt	27 Pkt	1 Pkt	90 Pcnt
1786696049	14.02 Volt	30 Pkt	1 Pkt	95 Pcnt
1786692446	14.02 Volt	37 Pkt	1 Pkt	92 Pcnt
1786688843	14.02 Volt	44 Pkt	2 Pkt	92 Pcnt
1786685239	14.02 Volt	29 Pkt	1 Pkt	97 Pcnt
1786681636	14.02 Volt	26 Pkt	1 Pkt	96 Pcnt
1786678032	14.02 Volt	38 Pkt	1 Pkt	91 Pcnt
1786674429	14.02 Volt	42 Pkt	2 Pkt	91 Pcnt
1786670825	14.02 Volt	42 Pkt	2 Pkt	93 Pcnt
1786667222	14.02 Volt	33 Pkt	2 Pkt	92 Pcnt
1786663619	14.02 Volt	48 Pkt	4 Pkt	89 Pcnt
1786660015	14.02 Volt	37 Pkt	2 Pkt	92 Pcnt
1786656412	14.02 Volt	22 Pkt	1 Pkt	91 Pcnt
1786652808	14.02 Volt	35 Pkt	5 Pkt	86 Pcnt
1786649205	14.02 Volt	22 Pkt	2 Pkt	90 Pcnt
1786645602	14.02 Volt	21 Pkt	1 Pkt	93 Pcnt

*Used Equation Coefficients:

Vin: 0, 0.073, 0

Rx1hr: 0, 1, 0

Dig1h: 0, 1, 0

Eff1h: 0, 1, 0

Temp: 0, 0, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)