APRS Track Direct

My position About ☰

reset

IV3CVN-10 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object IV3CVN-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Vin*	Rx1h*	Dg1h*	Eff1h*
1763276839	11.93 Volt	110 Pkt	50 Pkt	59 Pcnt
1763276539	11.93 Volt	130 Pkt	50 Pkt	59 Pcnt
1763276239	11.93 Volt	130 Pkt	50 Pkt	59 Pcnt
1763275938	11.93 Volt	110 Pkt	50 Pkt	59 Pcnt
1763275638	11.93 Volt	110 Pkt	50 Pkt	59 Pcnt
1763275338	11.93 Volt	70 Pkt	50 Pkt	59 Pcnt
1763275038	11.93 Volt	20 Pkt	50 Pkt	59 Pcnt
1763274737	11.93 Volt	30 Pkt	50 Pkt	59 Pcnt
1763274437	11.93 Volt	80 Pkt	50 Pkt	59 Pcnt
1763274137	11.93 Volt	110 Pkt	50 Pkt	59 Pcnt
1763273836	11.93 Volt	110 Pkt	50 Pkt	59 Pcnt
1763273536	11.93 Volt	110 Pkt	50 Pkt	59 Pcnt
1763273236	11.93 Volt	110 Pkt	50 Pkt	59 Pcnt
1763272935	11.93 Volt	110 Pkt	50 Pkt	59 Pcnt
1763272635	11.93 Volt	110 Pkt	50 Pkt	59 Pcnt
1763272335	11.93 Volt	110 Pkt	50 Pkt	59 Pcnt
1763272035	11.93 Volt	110 Pkt	50 Pkt	59 Pcnt
1763271734	11.93 Volt	90 Pkt	50 Pkt	59 Pcnt
1763271434	11.93 Volt	40 Pkt	50 Pkt	59 Pcnt
1763271134	11.93 Volt	20 Pkt	50 Pkt	59 Pcnt
1763270833	11.93 Volt	60 Pkt	50 Pkt	59 Pcnt
1763270533	11.93 Volt	100 Pkt	60 Pkt	59 Pcnt
1763270233	11.93 Volt	110 Pkt	60 Pkt	60 Pcnt
1763269933	11.93 Volt	110 Pkt	60 Pkt	60 Pcnt
1763269632	11.93 Volt	100 Pkt	60 Pkt	60 Pcnt

*Used Equation Coefficients:

Vin: 0, 0.079, 0

Rx1h: 0, 10, 0

Dg1h: 0, 10, 0

Eff1h: 0, 1, 0

A5: 0, 0, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)