This is the latest recevied telemetry packets stored in our database for station/object WB6CDF. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Battery* | Temp* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1774144100 | 13.3 Volts | -459.67 Deg.F | 0 | 0 | 0 |
| 1774143973 | 14.06 Volts | -459.67 Deg.F | 0 | 0 | 0 |
| 1774143930 | 13.57 Volts | -459.67 Deg.F | 0 | 0 | 0 |
| 1774143923 | 13.27 Volts | -459.67 Deg.F | 0 | 0 | 0 |
| 1774143810 | 14.01 Volts | -459.67 Deg.F | 0 | 0 | 0 |
| 1774143696 | 13.3 Volts | -459.67 Deg.F | 0 | 0 | 0 |
| 1774143650 | 12.6 Volts | -459.67 Deg.F | 0 | 0 | 0 |
| 1774143594 | 13.45 Volts | -459.67 Deg.F | 0 | 0 | 0 |
| 1774143535 | 13.36 Volts | -459.67 Deg.F | 0 | 0 | 0 |
| 1774143523 | 13.3 Volts | -459.67 Deg.F | 0 | 0 | 0 |
| 1774143510 | 13.54 Volts | -459.67 Deg.F | 0 | 0 | 0 |
| 1774143448 | 13.51 Volts | -459.67 Deg.F | 0 | 0 | 0 |
| 1774143432 | 13.21 Volts | -459.67 Deg.F | 0 | 0 | 0 |
| 1774143382 | 13.36 Volts | -459.67 Deg.F | 0 | 0 | 0 |
| 1774143370 | 13.39 Volts | -459.67 Deg.F | 0 | 0 | 0 |
| 1774143185 | 13.39 Volts | -459.67 Deg.F | 0 | 0 | 0 |
| 1774143074 | 13.33 Volts | -459.67 Deg.F | 0 | 0 | 0 |
| 1774143040 | 13.42 Volts | -459.67 Deg.F | 0 | 0 | 0 |
| 1774142998 | 13.68 Volts | -459.67 Deg.F | 0 | 0 | 0 |
| 1774142931 | 13.57 Volts | -459.67 Deg.F | 0 | 0 | 0 |
| 1774142754 | 13.36 Volts | -459.67 Deg.F | 0 | 0 | 0 |
| 1774142680 | 13.39 Volts | -459.67 Deg.F | 0 | 0 | 0 |
| 1774142615 | 13.19 Volts | -459.67 Deg.F | 0 | 0 | 0 |
| 1774142555 | 13.27 Volts | -459.67 Deg.F | 0 | 0 | 0 |
| 1774142435 | 13.54 Volts | -459.67 Deg.F | 0 | 0 | 0 |
*Used Equation Coefficients:
Battery: 0, 0.0293, 0
Temp: 0, 0.879, -459.67
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)