This is the latest recevied telemetry packets stored in our database for station/object SP2KFL-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1778023088 | 169 Count | 541 Count | 159 Count | 4.08 VDC | 0 VDC |
| 1778021287 | 145 Count | 460 Count | 136 Count | 4.09 VDC | 0 VDC |
| 1778019487 | 119 Count | 371 Count | 111 Count | 4.1 VDC | 0 VDC |
| 1778017694 | 89 Count | 289 Count | 86 Count | 4.09 VDC | 0 VDC |
| 1778015893 | 69 Count | 216 Count | 67 Count | 4.09 VDC | 0 VDC |
| 1778014093 | 48 Count | 150 Count | 47 Count | 4.09 VDC | 0 VDC |
| 1778012292 | 22 Count | 69 Count | 22 Count | 4.09 VDC | 0 VDC |
| 1778010491 | 313 Count | 1016 Count | 296 Count | 4.09 VDC | 0 VDC |
| 1778008691 | 294 Count | 948 Count | 278 Count | 4.11 VDC | 0 VDC |
| 1778006890 | 273 Count | 876 Count | 258 Count | 4.08 VDC | 0 VDC |
| 1778005089 | 250 Count | 790 Count | 236 Count | 4.11 VDC | 0 VDC |
| 1778003288 | 231 Count | 727 Count | 218 Count | 4.08 VDC | 0 VDC |
| 1778001488 | 213 Count | 667 Count | 201 Count | 4.11 VDC | 0 VDC |
| 1777999687 | 182 Count | 570 Count | 171 Count | 4.09 VDC | 0 VDC |
| 1777997886 | 148 Count | 480 Count | 138 Count | 4.09 VDC | 0 VDC |
| 1777996094 | 125 Count | 425 Count | 120 Count | 4.1 VDC | 0 VDC |
| 1777994293 | 107 Count | 359 Count | 103 Count | 4.1 VDC | 0 VDC |
| 1777992492 | 82 Count | 281 Count | 79 Count | 4.12 VDC | 0 VDC |
| 1777990692 | 53 Count | 194 Count | 51 Count | 4.08 VDC | 0 VDC |
| 1777988891 | 34 Count | 126 Count | 33 Count | 4.1 VDC | 0 VDC |
| 1777987090 | 14 Count | 46 Count | 14 Count | 4.11 VDC | 0 VDC |
| 1777985289 | 362 Count | 1010 Count | 347 Count | 4.09 VDC | 0 VDC |
| 1777983489 | 343 Count | 951 Count | 329 Count | 4.12 VDC | 0 VDC |
| 1777981688 | 309 Count | 866 Count | 296 Count | 4.08 VDC | 0 VDC |
| 1777979887 | 249 Count | 731 Count | 237 Count | 4.09 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)