APRS Track Direct

My position About ☰

reset

SP8IZA-1 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object SP8IZA-1. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Tzew*	Twew*	Uzas*	Cisn*	DHT*
1836274591	11.5 stC	18.9 stC	13.33 Volt	1004.2 hPa	11 stC
1836274442	11.5 stC	18.9 stC	13.33 Volt	1004.1 hPa	11 stC
1836274291	11.5 stC	18.9 stC	13.35 Volt	1004.3 hPa	11 stC
1836274142	11.5 stC	18.9 stC	13.35 Volt	1004.1 hPa	11 stC
1836273990	11.5 stC	18.9 stC	13.33 Volt	1004.3 hPa	11 stC
1762311364	1.6 stC	10.6 stC	13.33 Volt	1006.3 hPa	2 stC
1762311063	1.6 stC	10.6 stC	13.33 Volt	1006.2 hPa	2 stC
1762310763	1.6 stC	10.7 stC	13.33 Volt	1006.3 hPa	2 stC
1762310462	1.6 stC	10.7 stC	13.33 Volt	1006.3 hPa	2 stC
1762310161	1.6 stC	10.7 stC	13.33 Volt	1006.2 hPa	2 stC
1762309861	1.6 stC	10.8 stC	13.33 Volt	1006.2 hPa	2 stC
1762309561	1.7 stC	10.8 stC	13.33 Volt	1006.3 hPa	2 stC
1762309260	1.7 stC	10.8 stC	13.33 Volt	1006.4 hPa	2 stC
1762308960	1.8 stC	10.8 stC	13.33 Volt	1006.5 hPa	2 stC
1762308659	1.8 stC	10.9 stC	13.33 Volt	1006.5 hPa	2 stC
1762308359	1.9 stC	10.9 stC	13.33 Volt	1006.5 hPa	2 stC
1762308058	2 stC	11 stC	13.33 Volt	1006.4 hPa	2 stC
1762307758	2 stC	11 stC	13.33 Volt	1006.2 hPa	2 stC
1762307457	2 stC	11 stC	13.33 Volt	1006.3 hPa	2 stC
1762307156	2.1 stC	11 stC	13.33 Volt	1006.3 hPa	2 stC
1762306856	2.1 stC	11 stC	13.33 Volt	1006.3 hPa	2 stC
1762306556	2.1 stC	11.1 stC	13.33 Volt	1006.2 hPa	2 stC
1762306255	2.2 stC	11.1 stC	13.33 Volt	1006.3 hPa	2 stC
1762305955	2.2 stC	11.1 stC	13.33 Volt	1006.4 hPa	2 stC
1762305654	2.2 stC	11.2 stC	13.33 Volt	1006.4 hPa	2 stC

*Used Equation Coefficients:

Tzew: 0, 0.1, -50

Twew: 0, 0.1, -50

Uzas: 0, 0.025, 0

Cisn: 0, 0.1, 950

DHT: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)